Hobie Forums http://www.hobie.com/forums/ |
|
Question on swapping out a Evolve V1 motor to Evolve V2 http://www.hobie.com/forums/viewtopic.php?f=73&t=45610 |
Page 1 of 1 |
Author: | LAMEDUCK [ Sat Nov 10, 2012 11:00 am ] |
Post subject: | Question on swapping out a Evolve V1 motor to Evolve V2 |
I already have a fully installed V1 Hobie Evolve motor system on my Outback, when the time comes to replace it, can I just buy a separate new motor Hobie item # 72022130 for $720 and and new V2 battery item # 72022131 for $720 and keep the same throttle and cable hook ups and I am good to go? This way I am only expending $1,440, rather than buying a whole new system for $2,059. This type of technical info is not readily available to me and wanted to hear from those in the know. Thank you in advance, for any information you might have. |
Author: | Herbaldew [ Sat Nov 10, 2012 2:16 pm ] |
Post subject: | Re: Question on swapping out a Evolve V1 motor to Evolve V2 |
I'm not sure about the throttle cable, but the V1 and V2 power cables are NOT interchangeable. |
Author: | Herbaldew [ Mon Nov 12, 2012 10:58 am ] |
Post subject: | Re: Question on swapping out a Evolve V1 motor to Evolve V2 |
Based on this answer to one of your other posts: Jbernier wrote: Only V2 are sold now - you can get one and it will work with your motor - you just get a plug adapter, easy. Looks like the old cable could be adapted to fit - first I have heard of an available adapter. |
Author: | mmiller [ Tue Nov 13, 2012 5:46 pm ] |
Post subject: | Re: Question on swapping out a Evolve V1 motor to Evolve V2 |
Take advantage of Torqeedo's battery recall. It essentially updates / upgrades your system. http://www.torqeedo.com/us/service-center-us/notifications-recalls |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |