Hobie Forums http://www.hobie.com/forums/ |
|
Upgrade a V1 drive to V2? http://www.hobie.com/forums/viewtopic.php?f=75&t=43094 |
Page 1 of 1 |
Author: | coachstevo [ Sun Jun 03, 2012 5:56 am ] |
Post subject: | Upgrade a V1 drive to V2? |
So I have upgraded my v1 drive sprockets and masts, but have noticed that the chains cable part is starting to wear significantly. So- what do I need to go all the way to a v2 drive? Chains obviously...but would I also need new drums? |
Author: | NOHUHU [ Sun Jun 03, 2012 2:26 pm ] |
Post subject: | Re: Upgrade a V1 drive to V2? |
New drums, cables and chains at least. Drumshaft, pedals, maybe idler, sprocket guards and some nuts are the only shared components, I believe. This is a Roadrunner question, for sure. |
Author: | Chekika [ Sun Jun 03, 2012 2:57 pm ] |
Post subject: | Re: Upgrade a V1 drive to V2? |
Here is the link to Roadrunner's directions for upgrading the Mirage Drive from V1 to V2: http://www.hobiecat.com/forums/viewtopic.php?f=11&t=10710 Keith |
Author: | NOHUHU [ Sun Jun 03, 2012 6:08 pm ] |
Post subject: | Re: Upgrade a V1 drive to V2? |
THIS WAS POSTED BACK IN 2007 New Drive Parts Here are the part numbers for the newer MirageDrive drums and cables. Drum V2 #81173001 (need 2) Chain Assembly V2 #81202001 (need 2) Idler Cable V2 #81203001 (need 1) Also replace the nylock nuts when replacing cables and chains. #8050111 (need 6) _________________ Matt Miller Hobie Cat USA |
Author: | coachstevo [ Mon Jun 04, 2012 4:48 am ] |
Post subject: | Re: Upgrade a V1 drive to V2? |
Thanks guys |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |