To clarify, I am talking about these 4 screws.
| Hobie Forums http://www.hobie.com/forums/ |
|
| sail mast receiver screws http://www.hobie.com/forums/viewtopic.php?f=75&t=61003 |
Page 1 of 1 |
| Author: | galager [ Mon Jul 10, 2017 9:27 am ] |
| Post subject: | sail mast receiver screws |
We recently inherited a tandem island hobie. I'm going through it an performing some overdue maintenance and repairs. I inspected the sail mast receiver and it is missing 3 screws and the 4th was loose (which explains why it would not unfurl easily). Does anyone know where I can buy replacement screws, or what size and thread pitch these are? |
|
| Author: | mmiller [ Mon Jul 10, 2017 9:47 am ] |
| Post subject: | Re: sail mast receiver screws |
Holding the pin in place? 8032077 SCREW 1/4-20x1/2 RHMS-P SS |
|
| Author: | galager [ Mon Jul 10, 2017 9:59 am ] |
| Post subject: | Re: sail mast receiver screws |
To clarify, I am talking about these 4 screws.
|
|
| Author: | galager [ Mon Jul 10, 2017 11:48 am ] |
| Post subject: | Re: sail mast receiver screws |
mmiller wrote: Holding the pin in place? 8032077 SCREW 1/4-20x1/2 RHMS-P SS Thanks Matt. To clarify, these are the screws I am referring to: Any idea where I can buy them? I googled the part number to no avail... |
|
| Author: | mmiller [ Mon Jul 10, 2017 4:28 pm ] |
| Post subject: | Re: sail mast receiver screws |
Yes, that is the screw. The part is available from a Hobie dealer. |
|
| Author: | KayakingBob [ Tue Jul 11, 2017 3:53 pm ] |
| Post subject: | Re: sail mast receiver screws |
A little Loctite should stop them from loosening again. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|