Cross brace bracket broke off

Hi, one of my TI cross-brace holders snapped off. I tried to rivet it back in place, but the hole in the aka is too large. Any suggestions? I thought maybe I could use JBWeld, but I'd rather rivet it in place.

https://drive.google.com/a/allprosoftwa ... sp=sharing

Cannot see picture.

_________________
Sale: 12Ah/15Ah Lithium Battery
http://www.norcalkayakanglers.com/index ... #msg959037

Is it possible to upload a picture on the forums?

Image posting FAQ:https://www.hobie.com/forums/viewtopic.php?f=21&t=12574

Hobie does not host images or files on our private servers due to liability and security issues.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)

Ok, try this.

Ahhh... not a critical part, so even a zip tie around the crossbar could hold this. I would replace the rivet or use a larger size (than the 3/16 rivet) screw possibly.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)

Right not critical- just annoying to have the bar flopping around. Good idea on the zip tie- I'll give that a whirl.