Hobie Forums
http://www.hobie.com/forums/

TI Mirage Drive Well Puncture
http://www.hobie.com/forums/viewtopic.php?f=75&t=62612
Page 1 of 1

Author:  RedTI [ Mon Apr 30, 2018 11:39 am ]
Post subject:  TI Mirage Drive Well Puncture

What is the fix for a puncture created at front end of mirage drive well where front of Mirage drive pushes down. Location of puncture hole is forward Mirage Drive well forward end.

Author:  mmiller [ Mon Apr 30, 2018 3:38 pm ]
Post subject:  Re: TI Mirage Drive Well Puncture

Usually we don't recommend repairs under the waterline. How old is the boat? How did it happen?

Author:  RedTI [ Tue May 01, 2018 8:46 pm ]
Post subject:  Re: TI Mirage Drive Well Puncture

If a photo is needed I need instructions.

Author:  mmiller [ Wed May 02, 2018 8:51 am ]
Post subject:  Re: TI Mirage Drive Well Puncture

Posting images: https://www.hobie.com/forums/viewtopic.php?f=18&t=8574

Author:  RedTI [ Wed May 02, 2018 7:16 pm ]
Post subject:  Re: TI Mirage Drive Well Puncture

IMG_2892.jpg
IMG_2895.jpg

Here are pictures of the holes in the mirage drive well. Forward end rear seat.

Author:  RedTI [ Wed May 02, 2018 7:38 pm ]
Post subject:  Re: TI Mirage Drive Well Puncture

https://www.flickr.com/photos/161468136 ... ed-public/

Please let me know if you can access the photos.

There should be two photos, one of the whole and the other of the serial#

Author:  mmiller [ Thu May 03, 2018 10:44 am ]
Post subject:  Re: TI Mirage Drive Well Puncture

There is no Hobie recommended repair for this type of damage when below waterline. We would recommend a hull replacement.

This is a 2012 model, unusual to see in boats of this vintage. Did you purchase new?

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/