Good day,
I am so excited to be in a Hobie and can't wait to sail around Tobermory, Ontario! After two years of looking I finally found a used 2010 Adventure Island. I found everything to be in great condition with nothing broken. I sure hope this is a noob problem that you can help with.
I performed a bit of maintenance (silicone oil, tighten chain) on the Mirage Drive and it moves freely and completely when out of the hull.
In the hull, the fins only hug the stern on the right side and are quite far from the hull on the port side. There is also not much pedal travel on that stroke. I've included pictures to try and assist/show what I mean.
The masts and fins don't look terribly parallel so I expect that it could be a bent mast but I am not sure that would fix the problem on both sides.
Thank you for your ideas.
Paul