Hobie Forums
http://www.hobie.com/forums/

Pro angler steering
http://www.hobie.com/forums/viewtopic.php?f=78&t=16432
Page 1 of 2

Author:  bobalford [ Fri Oct 30, 2009 7:22 am ]
Post subject:  Pro angler steering

I understand there is consideration on changing the steering to make it less sensitive. Has there been any progress?

Author:  mmiller [ Fri Oct 30, 2009 10:01 am ]
Post subject:  Re: Pro angler steering

Yes. A new steering "drum" is ordered and should be available in about a month. We will inform registered owners, dealers and forums when it comes in. This will be a free upgrade.

84500501 Steering Drum

Image

Pro Angler steering is more sensitive than some users desire. Hobie Cat has designed this new steering drum to reduce this sensitivity. This change reduces the motion of the rudder in relation to handle movement. Turning sharply is reduced, but steering in a straight line is easier.

Author:  drpopper [ Fri Oct 30, 2009 5:17 pm ]
Post subject:  Re: Pro angler steering

Hooray ....

Author:  mmiller [ Wed Nov 18, 2009 1:03 pm ]
Post subject:  Re: Pro angler steering

The new drum is here and available. We will ship direct if you have already registered your warranty with us. Otherwise, contact your dealer!

Author:  CR Caldwell [ Wed Nov 18, 2009 9:14 pm ]
Post subject:  Re: Pro angler steering

mmiller wrote:
The new drum is here and available. We will ship direct if you have already registered your warranty with us. Otherwise, contact your dealer!

Basic replacement video: http://picasaweb.google.com/jimczarnows ... 0016783154

Matt,
If we registered, do you guys send it out automatically or will we get some notification or do we need to request it?
Thanks!

Author:  mmiller [ Thu Nov 19, 2009 5:00 pm ]
Post subject:  Re: Pro angler steering

Quote:
We will ship direct if you have already registered your warranty with us.

Author:  bobalford [ Sat Nov 21, 2009 6:18 pm ]
Post subject:  Re: Pro angler steering

How do I find out if my boat is registered with you? I purchased it from Backyard Boats, Woodbridge, VA. It was in the very shipment they received and they wanted to register it for me.

Author:  yakkingaway [ Sat Nov 21, 2009 7:16 pm ]
Post subject:  Re: Pro angler steering

You should have sent in the card that came in the paperwork with the hull number on it. That would let Hobie know you had that particular hull. Also, you can do it on line. Need your hull number. There's help on line to find out where that is... I just found mine on the stern. Had to dirty my finger and wipe it over the numbers to be able to read them.

Author:  NH Explorer [ Sun Nov 22, 2009 7:51 am ]
Post subject:  Re: Pro angler steering

Matt, to what degree does this limit the tightness of the turn? I hope to get one installed and try it before the ice gets here but in case I don't would like to have an idea.
Thanks, Roger

Author:  mmiller [ Mon Nov 23, 2009 1:10 pm ]
Post subject:  Re: Pro angler steering

Engineers say the change is minimal. We had it set up to turn WAY too tight anyway. Too easy to turn the rudder near full 90.

Author:  NH Explorer [ Mon Nov 23, 2009 3:24 pm ]
Post subject:  Re: Pro angler steering

Thanks Matt

Author:  mmiller [ Tue Nov 24, 2009 11:39 am ]
Post subject:  Re: Pro angler steering

Here is a quick video on the installation:

[youtube]http://www.youtube.com/watch?v=QbzNaGMJoi0[/youtube]

Author:  mmiller [ Wed Nov 25, 2009 11:47 am ]
Post subject:  Re: Pro angler steering

Printed instructions: http://static.hobiecat.com/web_uploads/2009/11/24/84500501.pdf

Author:  atavuss [ Sat Nov 28, 2009 7:48 pm ]
Post subject:  Re: Pro angler steering

I recieved a replacement drum today in the mail. Thanks Matt and Hobie!

Author:  bobalford [ Sat Nov 28, 2009 8:00 pm ]
Post subject:  Re: Pro angler steering

I did also. Thankyou also.

Page 1 of 2 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/