| Hobie Forums http://www.hobie.com/forums/ |
|
| Need advice on a camera mount http://www.hobie.com/forums/viewtopic.php?f=78&t=44077 |
Page 1 of 1 |
| Author: | Jfnall [ Tue Jul 24, 2012 5:01 am ] |
| Post subject: | Need advice on a camera mount |
I need to know what part to buy. I have 2 panfish mounts. One is the short one, and the other is the long pole mount. Both are made to mount to the gear track. What I am looking for is a way to mount the panfish to the "sail hole" in the front of the cockpit area. Not sure what the hole is called. It has a rubber cap on it and the pics in the catalogue show the sail here. I don't want to change the way the pole mounts, I just want to add a mount to that hole that is the same as the geartrack slot. Any ideas? Thanks Jeff |
|
| Author: | Bronze91 [ Tue Jul 24, 2012 2:48 pm ] |
| Post subject: | Re: Need advice on a camera mount |
Jeff, You may be able to use a Ram wedge 1.5" part # 72023015 ($14.95) Gene |
|
| Author: | atavuss [ Tue Jul 24, 2012 4:46 pm ] |
| Post subject: | Re: Need advice on a camera mount |
Its called the "mast" hole. I did just that, mounted a RAM wedge mount in the mast hole then two dog bones then the GoPro mount. Had to use a bungee cord from the front carry handle to the middle of the dog bones because the entire assembly bounced around too much. I also used the 1.5" balls instead of the 1" balls. 
|
|
| Author: | Jfnall [ Tue Jul 24, 2012 8:42 pm ] |
| Post subject: | Re: Need advice on a camera mount |
Is that a ram part number or a Hobie pat number? Thanks |
|
| Author: | Bronze91 [ Wed Jul 25, 2012 5:34 am ] |
| Post subject: | Re: Need advice on a camera mount |
Jfnall wrote: Is that a ram part number or a Hobie pat number? Thanks Hobie |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|