| Hobie Forums http://www.hobie.com/forums/ |
|
| Looking for dimensions for PA12 Cradle pieces... http://www.hobie.com/forums/viewtopic.php?f=78&t=44188 |
Page 1 of 1 |
| Author: | wjpelka [ Mon Jul 30, 2012 12:46 pm ] |
| Post subject: | Looking for dimensions for PA12 Cradle pieces... |
Got a new PA12' and have a trailer that I want to see if the Cradles will work on. My problem is I am a little cramped on space. If the cradle raises the PA up too high, I won't be able to fit it into my lower level of a 2 level trailer. I currently have 2 Bunks that are about 65" apart and have 2 10' sections of 2" pvc on them. The crisscross pattern of the Bunks and PVC would work but I was hoping for something more stable. The cradles are a pair, front and rear. So what I need are the HxWxL of each. I have looked thru Google and I can see pics, but need the dimensions. If you have any other ideas, please let me hear them...! Bill in Spokane, WA 2009 Outback - Olive 2011 Outback - Yellow 2012 PA12' - Olive |
|
| Author: | Shimanoman [ Mon Jul 30, 2012 12:56 pm ] |
| Post subject: | Re: Looking for dimensions for PA12 Cradle pieces... |
Bill, If you go to page 2 of this forum there is a thread by Tom Kirkman about Tandem Trailers with lots of photos. I think you could modify your trailer utilizing the PVC such as he did and not have any problem with height on your first layer. Good luck!! Regards........ |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|