| Hobie Forums http://www.hobie.com/forums/ |
|
| Turning troubles http://www.hobie.com/forums/viewtopic.php?f=78&t=45553 |
Page 2 of 2 |
| Author: | Marble Man [ Sun Dec 23, 2012 1:03 pm ] |
| Post subject: | Re: Turning troubles |
dwntwnall4u wrote: Marble Man wrote: Email sent Did you email me? Never received it. Resent them you should have them now. If not email me or check your spam file. |
|
| Author: | Hollada [ Mon Apr 01, 2013 10:04 am ] |
| Post subject: | Re: Turning troubles |
I have the same issue - rudder won't turn as far left as right due to steering knob hitting left side grab rail. Can you let me know how you fixed it? |
|
| Author: | Marble Man [ Mon Apr 01, 2013 8:50 pm ] |
| Post subject: | Re: Turning troubles |
dwntwnall4u wrote: Marble Man wrote: Email sent Did you email me? Never received it. I'll see if I still have the pics and emails and send them again. The dealer pulled the steering knob off, took out the tackle organizer to gain access to the control rod, take off the lines, pull out the control rod, cut the metal post that travels within a groove that acts as a stop, then resemble. Steering problem solved. Let the dealer do so you don't lose your warranty. Hope that helps, MM |
|
| Author: | Marble Man [ Mon Apr 01, 2013 9:08 pm ] |
| Post subject: | Re: Turning troubles |
Hollada wrote: I have the same issue - rudder won't turn as far left as right due to steering knob hitting left side grab rail. Can you let me know how you fixed it? Sounds like you may have a PA14? The steering knob set up on my PA12 is different. You may need a different remedy. |
|
| Page 2 of 2 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|