| Hobie Forums http://www.hobie.com/forums/ |
|
| Steering knob hits rail 2012 pa14 http://www.hobie.com/forums/viewtopic.php?f=78&t=47044 |
Page 1 of 1 |
| Author: | Hollada [ Mon Apr 01, 2013 2:31 pm ] |
| Post subject: | Steering knob hits rail 2012 pa14 |
rudder won't turn as far left as right due to steering knob hitting left side grab rail. Anyone have a solution? |
|
| Author: | RockyRaab [ Mon Apr 01, 2013 3:14 pm ] |
| Post subject: | Re: Steering knob hits rail 2012 pa14 |
Mine did, too. I opened the rudder access and tightened the line a bit. With the rudder centered, my tiller now points a wee bit right. That gives me equal travel both ways. You'll see two screws holding the steering lines. Loosen the one on the left (looking forward) and pull that line a quarter inch tighter. You should see the tiller handle tweak a bit to the right. Re-tighten the screw. Done. |
|
| Author: | Hollada [ Mon Apr 01, 2013 6:28 pm ] |
| Post subject: | Re: Steering knob hits rail 2012 pa14 |
Thanks! I will give that a try. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|