Hobie Forums
http://www.hobie.com/forums/

Transporting 2 PA'S - Pickup
http://www.hobie.com/forums/viewtopic.php?f=78&t=48930		 Page 1 of 1
Author:  salmontim [ Thu Aug 15, 2013 8:16 pm ]
Post subject:  Transporting 2 PA'S - Pickup
ImageLoadedImageImageImage up PA14 (LOWER) & PA12 (upper)[img]http://img.tapatalk.com/d/13/08/16/jy9y2uze.jpg[/IMG[IMG]http://img.tapatalk.com/d/13/08/16/u2yge2a5.jpg[/img]ImageImage]
Sent from my SCH-I545 using Tapatalk 2
Author:  CaptTanny321 [ Fri Aug 16, 2013 4:08 am ]
Post subject:  Re: Transporting 2 PA'S - Pickup
You have just completely regained my confidence in being able to move these two bad boy 14's out to the water! Thank you!
Author:  jims [ Sat Aug 17, 2013 4:49 am ]
Post subject:  Re: Transporting 2 PA'S - Pickup
It looks like 1 is a 14 and other a 12? Do you think there would need to be support towards the back on an upper deck 14? I have a topper and would like to get both inside. It looks like it wouldn't work if there is anything attached that rides up very high on the upper one?
Author:  Alphonse [ Sat Aug 17, 2013 7:30 am ]
Post subject:  Re: Transporting 2 PA'S - Pickup
Tim,
like the use of the plasitc conduit - what size is it?
Thanks for photos
Author:  wolfewiz [ Sat Aug 17, 2013 9:15 pm ]
Post subject:  Re: Transporting 2 PA'S - Pickup
Simple and effective. Good setup.
Author:  Thinwater skinner [ Sun Aug 18, 2013 6:40 am ]
Post subject:  Re: Transporting 2 PA'S - Pickup
What will keep the top yak from coming through the window if you hit you breaks? Just wondering if you tie down other area not shown in the pictures... Good Luck
Author:  jims [ Sun Aug 18, 2013 3:37 pm ]
Post subject:  Re: Transporting 2 PA'S - Pickup
I would expect a piece of plywood may work between the PA and window to keep it from coming crashing through.
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/