Return to Hobie.com
Hobie Forums
It is currently Mon Oct 26, 2020 2:24 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Thu May 07, 2015 7:05 am 
Offline
Site Rank - Admiral

Joined: Sun Mar 11, 2012 7:14 am
Posts: 161
Location: Wilmington, NC
One of the click & go receivers seems to have a broken or missing spring. It will not lock closed with Mirage Drive or Evolve motor inserted. How to replace this spring? How to remove receiver?

I have a 2012 year PA14 with V2 stainless steel style receiver.

_________________
PA 14; 2012
Cape Fear River - NC


Top
 Profile  
 
PostPosted: Thu May 07, 2015 8:41 am 
Offline
Hobie Tech / Moderator

Joined: Wed May 28, 2003 1:12 pm
Posts: 1412
They can be removed with a 3/16" allen wrench with a ball end, through the two small holes in the top of the plastic cap that's how they're held onto the kayak. If you need help see your dealer - they can get you replacements directly. http://www.hobiecat.com/dealers/

_________________
Jacques Bernier
http://www.hobie.com/
http://www.facebook.com/HobieCatCompany


Top
 Profile  
 
PostPosted: Thu May 07, 2015 2:18 pm 
Offline
Site Rank - Admiral

Joined: Sun Mar 11, 2012 7:14 am
Posts: 161
Location: Wilmington, NC
Thank you Mr. Bernier for the quick response. The assembly is only missing the spring. Must have broken. It works manually but mirage drive seems loose on that side.
What part number do I ask the dealer to order for the spring only.

_________________
PA 14; 2012
Cape Fear River - NC


Top
 Profile  
 
PostPosted: Thu May 07, 2015 2:50 pm 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 13849
Location: Oceanside, California
81602101 SPRING CLICK-N-GO LEFT
81602201 SPRING CLICK-N-GO RIGHT

Image

_________________
Matt Miller
Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA


Top
 Profile  
 
PostPosted: Sat May 09, 2015 5:32 am 
Offline
Site Rank - Admiral

Joined: Sun Mar 11, 2012 7:14 am
Posts: 161
Location: Wilmington, NC
Perfect! Thx guys. Took the left side click-n-go out & found a broken spring.

_________________
PA 14; 2012
Cape Fear River - NC


Top
 Profile  
 
PostPosted: Sat Apr 30, 2016 2:55 pm 
Offline
Site Rank - Admiral

Joined: Sun Mar 11, 2012 7:14 am
Posts: 161
Location: Wilmington, NC
A year later & the right click & Go has failed....Same failure mode. The spring broke.

Any other folks have this issue?

_________________
PA 14; 2012
Cape Fear River - NC


Top
 Profile  
 
PostPosted: Mon Jun 24, 2019 6:55 pm 
Offline
Site Rank - Deck Hand

Joined: Mon Jun 24, 2019 6:21 pm
Posts: 1
My right side spring just broke as well. I'm assuming the cost is low (it's a tiny spring, sent to do a big job) so will order a couple pair.
Are these easy/intuitive to install, or will I need to take the handle cover off the good one, to see how it's routed?
Thanks all
Mac


Top
 Profile  
 
PostPosted: Sun Jul 12, 2020 3:51 pm 
Offline
Site Rank - Deck Hand

Joined: Thu Apr 16, 2015 4:55 pm
Posts: 16
I replaced the right click and go today, it was worn and unstable, causing the spring to break i believe. I was able to remove it , although the screw towards the front is a little difficult to access . On the re-install i removed the 2 small screws that keep the plastic "housing " together on the click and go , and that allowed easy access to the screw .


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group