HStrech wrote:
Your feedback has been noted...curious if your Hobie battery may be nearing the end of its life cycle? We recently tested the Elite 5Ti here at Hobie HQ with the TotalScan running side imaging, up & down sonar, and GPS on full brightness. We managed to get 10+ hours of run time on a fresh battery. Interesting.
exact same results on run time here on my elite 5Ti, but using a deer feeder battery 7ah or 8ah cant remember
Yak9107 wrote:
Is there a special plug for the harness of the Elite 7 Ti for where it comes through the side of the deck ? I just purchased this unit and i am trying to gather up everything i need for mounting it......or is a suitable plug in the pack that comes with the PA when new ?...would also like to know which Ram quick click fit it as ACK only has one for the Elite 5 listed...Thanks !...
elite 7 should use the exact same mount as the 5. you route the wires included with the ff through the hull fitting mounted on your yak, if you have the old style grommet i recommend going to the 3 way through hull mount (included on my 2017 model) to allow all 3 wires to enter the hull
part # 86505613 $18.99