Foam Support Blocks PA12

Does anyone have any pictures of the inside of there hull showing where the foam blocks are installed on a PA12. I have a 2012 or 2013 model. Can't remember exact. I've seen the diagram which is helpful showing general location, however all of my blocks are different sizes and I want to know exactly which one goes where. They have all came out of place. Please post pictures of under the seat and under the standing area if you have them. There are 3 black square blocks on each side of the standing area with a white round block behind them on both sides. There are 4 under the seat. Again I have the diagram but would like pictures.

Thanks Jason

Thank you sir. I do appreciate the diagram. I'm really hoping for some pictures if you have some. My blocks are all different shapes. Some have groves cut in them as if they were supposed to be oriented in a specific place. I may be being a little OCD about but I would love to get them back in the exact place they are supposed to be in and oriented correctly. Actual pictures below the deck would help me a bunch.

Were can I find a similar diagram for a 2015 PA 14?