Missing paddle drive mount

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

buddyb03

Post subject: Missing paddle drive mount

Posted: Mon Jul 04, 2022 6:45 am

Site Rank - Deck Hand

Joined: Sat Aug 15, 2020 8:11 am
Posts: 1

Newbie here. Don’t know proper name, but I am completely missing the piece that attaches to the body of the kayak that holds the drive in place. There is one on the port side, held by three screws, and has a gear to mesh with the drive as the drive is inserted into position. The starboard one is in the drink somewhere!? Can I obtain that part. And what is it called? Any help appreciated.Hobie Pro Angler 12 foot

Buddyb03 from SW Michigan

Top

Dr.SteelheadCatcher

Post subject: Re: Missing paddle drive mount

Posted: Thu Jul 07, 2022 6:14 am

Site Rank - Old Salt

Joined: Thu Dec 10, 2009 2:40 pm
Posts: 1372

It sounds like you are missing the right click and go bracket in the mirage drive well.

The P/N for the right side is 81611201 and the Allen head SS screws are P/N 8030791.

You should also purchase a 3/16" Allen-Ball-end wrench from your hardware store so you can secure the screws and not lose
another click and go mount.

_________________
Dr.SteelheadCatcher
Warrenton, OR

Top

Page 1 of 1

[ 2 posts ]

Board index » Hobie Kayaking / Fishing » Hobie Mirage Pro Anglers

All times are UTC - 8 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to: