| Hobie Forums http://www.hobie.com/forums/ |
|
| 2021 PA12-360 hull crack under the drive http://www.hobie.com/forums/viewtopic.php?f=78&t=71078 |
Page 1 of 1 |
| Author: | MWender [ Thu Sep 07, 2023 7:08 pm ] |
| Post subject: | 2021 PA12-360 hull crack under the drive |
I was browsing the internet and I have came across countless people having their hull crack under the 360 drive. So, I was curious, and took mine apart, and sure enough... my hull has the same crack, alongside a nut that's molded into the hull. I was wondering has this problem been addressed, are the new hulls reinforced around this problem area? |
|
| Author: | Gunnyak [ Fri Mar 08, 2024 6:38 pm ] |
| Post subject: | Re: 2021 PA12-360 hull crack under the drive |
MWender wrote: I was browsing the internet and I have came across countless people having their hull crack under the 360 drive. So, I was curious, and took mine apart, and sure enough... my hull has the same crack, alongside a nut that's molded into the hull. I was wondering has this problem been addressed, are the new hulls reinforced around this problem area? Not one response to this? 6 months later? |
|
| Author: | Dr.SteelheadCatcher [ Sat Mar 09, 2024 7:12 am ] |
| Post subject: | Re: 2021 PA12-360 hull crack under the drive |
If not already done, contact your Hobie dealer and if no satisfaction, contact Hobie directly. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|