Return to Hobie.com
Hobie Forums
It is currently Thu Mar 28, 2024 2:03 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 23 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Glue My Hobie 16
PostPosted: Wed Apr 07, 2010 4:27 pm 
Offline
Site Rank - Admiral

Joined: Thu Jun 15, 2006 5:13 pm
Posts: 280
I'm about to glue my Hobie 16 so I'm taking some measurements before I take it apart. When I measure port bow to starboard transom it’s 2 inches shorter than starboard bow to port transom. How to I square them up? It’s not moving easily.

_________________
http://hobiebob.blogspot.com/


Top
 Profile  
 
 Post subject: Re: Glue My Hobie 16
PostPosted: Wed Apr 07, 2010 4:29 pm 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15027
Location: Oceanside, California
Loosen the tramp completely. Use a 2:1 line system to pull the long measurement.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)


Top
 Profile  
 
 Post subject: Re: Glue My Hobie 16
PostPosted: Thu Apr 08, 2010 6:15 am 
Offline
Site Rank - Old Salt

Joined: Sun Jun 08, 2003 7:21 pm
Posts: 904
Location: Thunder Bay,On
Bob,are you glueing just the pylons or are you also gluing your side bars.Check out this site.

http://www.thebeachcats.com/OnTheWire/w ... ature1.htm

Jan Gougeon (West System) was up here in Thunder Bay racing Dn's at the North American,s.He would be a good guy to talk to.


Top
 Profile  
 
 Post subject: Re: Glue My Hobie 16
PostPosted: Thu Apr 08, 2010 8:27 am 
Offline
Hobie Approved Guru

Joined: Mon Jul 14, 2003 7:11 pm
Posts: 5197
Location: Detroit, MI
mmadge wrote:
Bob,are you glueing just the pylons or are you also gluing your side bars.Check out this site.

http://www.thebeachcats.com/OnTheWire/w ... ature1.htm

Jan Gougeon (West System) was up here in Thunder Bay racing Dn's at the North American,s.He would be a good guy to talk to.


DO NOT GLUE THE SIDEBARS. The sidebars are not structural.


Top
 Profile  
 
 Post subject: Re: Glue My Hobie 16
PostPosted: Thu Apr 08, 2010 10:22 am 
Offline
Site Rank - Old Salt

Joined: Sun Jun 08, 2003 7:21 pm
Posts: 904
Location: Thunder Bay,On
Talked to a couple of guys at the N.A's and apparerntly they glued there side bars,seem to stiffen up the frame.My boat is very squeaky from the side bars corner castingings connection.


Top
 Profile  
 
 Post subject: Re: Glue My Hobie 16
PostPosted: Thu Apr 08, 2010 3:12 pm 
Offline
Hobie Approved Guru

Joined: Mon Jul 14, 2003 7:11 pm
Posts: 5197
Location: Detroit, MI
Just because other people do it doesn't mean it's right or good for the boat.

By gluing the sidebars, hard points are created that focus stress on the weakest part of the castings (the sidebar sockets). Eventually, they'll break. Ever try replacing a broken casting that's been glued in all three sockets? Not fun.

Besides, any "gains" achieved by gluing the sidebars are easily lost by bad boat handling (missed tacks, bad surfing techniques, over steering) or poor tactics and strategy.


Top
 Profile  
 
 Post subject: Re: Glue My Hobie 16
PostPosted: Thu Apr 08, 2010 3:39 pm 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15027
Location: Oceanside, California
I have suggested that a softer adhesive might work to limit the squeaky sidebar issue. Maybe try a bit of 3M 5200 rather than epoxy. I would inject somehow after the tramp in tightened. This would dampen the motion that causes the squeak.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)


Top
 Profile  
 
 Post subject: Re: Glue My Hobie 16
PostPosted: Thu Apr 08, 2010 3:55 pm 
Offline
Site Rank - Old Salt

Joined: Sun Jun 08, 2003 7:21 pm
Posts: 904
Location: Thunder Bay,On
mmiller wrote:
I have suggested that a softer adhesive might work to limit the squeaky sidebar issue. Maybe try a bit of 3M 5200 rather than epoxy. I would inject somehow after the tramp in tightened. This would dampen the motion that causes the squeak.


Good sugestion Matt M.Any suggestions on how to get the 5200 in there while tramp is still together.


Top
 Profile  
 
 Post subject: Re: Glue My Hobie 16
PostPosted: Thu Apr 08, 2010 4:29 pm 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15027
Location: Oceanside, California
Not looking at one now, but there is a bit of gap you could likely stuff material into. I don't think it would need to be filled to dampen the sound / vibration.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)


Top
 Profile  
 
 Post subject: Re: Glue My Hobie 16
PostPosted: Thu Apr 08, 2010 4:53 pm 
Offline
Site Rank - Old Salt

Joined: Sun Jun 08, 2003 7:21 pm
Posts: 904
Location: Thunder Bay,On
MBounds wrote:
Just because other people do it doesn't mean it's right or good for the boat.

.

You mean like racing it in 20+ knts of wind and 3-4' waves.


Top
 Profile  
 
 Post subject: Re: Glue My Hobie 16
PostPosted: Thu Apr 08, 2010 6:20 pm 
Offline
Site Rank - Admiral

Joined: Thu Jun 15, 2006 5:13 pm
Posts: 280
I plan to do the sidebars. I think they should help hold the platform square (vs parallelogram).

_________________
http://hobiebob.blogspot.com/


Top
 Profile  
 
 Post subject: Re: Glue My Hobie 16
PostPosted: Fri Apr 09, 2010 9:06 am 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15027
Location: Oceanside, California
I think gluing the sidebars is problematic. The angle of entry into the corner castings changes with tramp tension and weight on the side rail when sailing. They will flex and if the ends are held rigid in the castings?

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)


Top
 Profile  
 
 Post subject: Re: Glue My Hobie 16
PostPosted: Mon Apr 12, 2010 10:23 am 
Offline
Site Rank - Old Salt

Joined: Sun Jun 08, 2003 7:21 pm
Posts: 904
Location: Thunder Bay,On
Bob, how did it turn out? Any sugestions or advice.I am thinking of doing mine,might just use 3M 5200 instead of epoxy.


Top
 Profile  
 
 Post subject: Re: Glue My Hobie 16
PostPosted: Tue Apr 13, 2010 3:15 pm 
Offline
Site Rank - Admiral

Joined: Thu Jun 15, 2006 5:13 pm
Posts: 280
I think it went well. I did glue the side bars and I didn’t lace the tramp until the glue dried. The result is that the side bars don’t bend as much when the tramp is tightened.
I did not drill out the rivets on the cross beams. I did use a syringe to get some glue in there but I didn’t use and filler for this part. I’ll have to go racing to see if it all works out.

Oh yea and I didn’t pull on the bow and transom to straighten the boat. I thought there was too much risk of just flexing the bow. Instead I went across the platform from casting to casting and pulled the boat square that way.

_________________
http://hobiebob.blogspot.com/


Top
 Profile  
 
 Post subject: Re: Glue My Hobie 16
PostPosted: Tue Apr 13, 2010 4:13 pm 
Offline
Site Rank - Old Salt

Joined: Wed Jul 21, 2004 7:46 pm
Posts: 1457
Location: Santa Cruz
BobMerrick wrote:

Oh yea and I didn’t pull on the bow and transom to straighten the boat. I thought there was too much risk of just flexing the bow. Instead I went across the platform from casting to casting and pulled the boat square that way.


Never heard of anyone doing it that way before, maybe it's the new cool way. The best way is from pylon to pylon, that way you don't 'square' your boat with one bow forward of the other, which is the point of squaring in the boat in he first place. Is the tramp frame square now?

_________________
Sail Revolution
Join us on our new FB Page!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 23 posts ]  Go to page 1, 2  Next

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group