Return to Hobie.com
Hobie Forums
It is currently Thu Mar 28, 2024 9:00 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 15 posts ] 
Author Message
 Post subject: Hobie craddle set
PostPosted: Fri Sep 28, 2012 1:29 pm 
Offline
Site Rank - Captain

Joined: Sat Jul 09, 2011 6:35 am
Posts: 72
I have purchased the craddle set for my PA and have spent way too much time trying to get a good fit. Has anyone at Hobie tried the fit of the front craddle to the hull? I have spent about 5 hours trying to tweak these craddles to get a good fit. The rear set seemed to work best when I ripped the 2X4 at 10* angle (I can"t fathom why they are not set up for flat mounting 90*). I can't find a point where the front fits properly. I even tried finding where it would fit on the hull just holding it up to the hull, not a very good fit anywhere. To even come close to having the side/bottom pads make contact the plastic above the pad at the craddle rubs the hull. In order to keep the plastic from rubbing the sides is to add additional 1/2" padding which seems kind of mickey mouse for me. Am I being to picky ? Has anyone tried these craddles?
Image[/img]
Image
The closest I could get using additional padding......I wonder if the pressure is spread out evenly??
Image
The rear works well after finding the angle, I have mine set up as removable because I don't want to stress the ends of the craddle sliding the PA through as it gets wider.
Image
*I am at 67 1/2" which seems best.


Top
 Profile  
 
 Post subject: Re: Hobie craddle set
PostPosted: Sat Sep 29, 2012 7:51 pm 
Offline
Site Rank - Deck Hand

Joined: Sun Oct 23, 2011 7:04 pm
Posts: 20
Location: Born & raised in NOLA, but Dwell in Abilene, Tx
Was wondering the same sort of thing myself. I'm wondering if the proper length for mounting the cradles differ between the models, as I have the PA 12 which is shorter than most. after digging I found this.
viewtopic.php?f=78&t=19974

_________________
The 7 P's

Proper
Pervious
Planning
Prevents
Piss
Poor
Performance
Basically, plan ahead or plan to fail.

Papaya Hobie Pro Angler 12


Top
 Profile  
 
 Post subject: Re: Hobie craddle set
PostPosted: Sun Sep 30, 2012 5:44 am 
Offline
Site Rank - Captain

Joined: Sat Jul 09, 2011 6:35 am
Posts: 72
The Hobbie craddles I got look totally different, very flimsy plastic. I am most likely bringing them back and I am very dissapointed that I spent so much time trying to make them fit. I should have spent all that time making my own.


Top
 Profile  
 
 Post subject: Re: Hobie craddle set
PostPosted: Tue Oct 09, 2012 8:05 am 
Offline
Site Rank - Captain

Joined: Sat Jul 09, 2011 6:35 am
Posts: 72
Am I the only person who bought these? Has anyone at Hobie even tried them on the hull?


Top
 Profile  
 
 Post subject: Re: Hobie craddle set
PostPosted: Tue Oct 09, 2012 8:30 am 
Offline
Site Rank - Old Salt

Joined: Wed May 28, 2003 1:12 pm
Posts: 1464
ecduzitgood wrote:
Am I the only person who bought these? Has anyone at Hobie even tried them on the hull?


The cradles are molded and have enough tolerance for variations in hull shapes due to the hull molding process. The pictures you posted look normal to us.
If you are unhappy with any product that we build feel free to return them to your purchasing dealer for a full refund.

They are the only ones we make now (the other posted talks about the original design cradles which were hand laid in fiberglass) We replaced those with the newer molded design, but the fit to the hull is the same, its just a better way of manufacturing, since we weren't able to keep up with demand making them by hand. We had to make the switch over to thermo-forming in order to be able to produce enough to keep up with order volume.

_________________
Jacques Bernier
http://www.hobie.com/
http://www.facebook.com/HobieCatCompany


Top
 Profile  
 
 Post subject: Re: Hobie craddle set
PostPosted: Tue Oct 09, 2012 1:30 pm 
Offline
Site Rank - Deck Hand

Joined: Thu May 03, 2012 8:09 am
Posts: 9
Are there any plans to develop a cradle set for an Outback?


Top
 Profile  
 
 Post subject: Re: Hobie craddle set
PostPosted: Tue Oct 09, 2012 1:48 pm 
Offline
Site Rank - Old Salt

Joined: Wed May 28, 2003 1:12 pm
Posts: 1464
knowltoh wrote:
Are there any plans to develop a cradle set for an Outback?

No - we suggest for standard kayaks to just flip them over as the deck is much stronger - the only reason we do cradles for Islands and Pro Angler is due to their size and weight - it would be a pain to flip them over but an Outback or Revo or other, it's simple.... sorry.

_________________
Jacques Bernier
http://www.hobie.com/
http://www.facebook.com/HobieCatCompany


Top
 Profile  
 
 Post subject: Re: Hobie craddle set
PostPosted: Sun Dec 08, 2013 5:57 pm 
Offline
Site Rank - Captain

Joined: Tue Sep 03, 2013 9:27 pm
Posts: 63
Location: Omaha, NE
How durable are the cradles for the PA 14 and what is the recommended distance from the manufacturer? Really debating whether to buy them or do a PVC assembly myself for my trailex.


Sent from my iPhone using Tapatalk


Top
 Profile  
 
 Post subject: Re: Hobie craddle set
PostPosted: Sun Dec 08, 2013 6:15 pm 
Offline
Site Rank - Captain

Joined: Sat Jun 25, 2011 4:54 pm
Posts: 110
ecduzitgood wrote:
Am I the only person who bought these? Has anyone at Hobie even tried them on the hull?
I

PVC is the way to go in my opinion.
Cheap and they easily conform to the exact shape you need them to. Plus you can adjust if you change boats easily.

_________________
It's not the heat it's the humility!!!
Hobie Pro Angler
Image
Image


Top
 Profile  
 
 Post subject: Re: Hobie craddle set
PostPosted: Tue Dec 10, 2013 11:21 am 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15026
Location: Oceanside, California
InlandYaker52 wrote:
How durable are the cradles for the PA 14 and what is the recommended distance from the manufacturer?


Very durable. No real issues after thousands sold.

67" is the spacing as noted in the catalogs.

Also noted... hulls vary and change shape with heat and storage compression, so fits will vary. They do not have to fit like a Glove to displace loads sufficiently.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)


Top
 Profile  
 
 Post subject: Re: Hobie craddle set
PostPosted: Tue Dec 10, 2013 3:58 pm 
Offline
Site Rank - Captain

Joined: Fri Jun 20, 2008 9:35 am
Posts: 112
Curious....Will the cradles "take form" to the hull if stored with the boat in place for some period of time, say over the winter, or if "warmed", for example?


Top
 Profile  
 
 Post subject: Re: Hobie craddle set
PostPosted: Tue Dec 10, 2013 6:54 pm 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15026
Location: Oceanside, California
SteveLIBS wrote:
Curious....Will the cradles "take form" to the hull if stored with the boat in place for some period of time, say over the winter, or if "warmed", for example?


I would bet the hull will form to the cradles mostly.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)


Top
 Profile  
 
 Post subject: Re: Hobie craddle set
PostPosted: Thu Dec 12, 2013 8:29 am 
Offline
Site Rank - Captain

Joined: Tue Jun 04, 2013 5:08 pm
Posts: 74
I am keeping my PA12 on the Trailex with cradles from Hobie. My question is whether that is a satisfactory way to store it for the winter. Will it take a set? I sent Hobie a query on this but they never responded to me. Prior to this boat I had owned a Mokai- same material- and it took a permanent set from my storage setup.


Top
 Profile  
 
 Post subject: Re: Hobie craddle set
PostPosted: Thu Dec 12, 2013 9:05 am 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15026
Location: Oceanside, California
On cradles should be fine.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)


Top
 Profile  
 
 Post subject: Re: Hobie craddle set
PostPosted: Thu Dec 12, 2013 9:08 am 
Offline
Site Rank - Captain

Joined: Tue Jun 04, 2013 5:08 pm
Posts: 74
Thanks, I appreciate that.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group