- Should I get a 10" or 12" pipe? I'm thinking 10" should be fine, but I thought I ask if there is any big advantage to 12". 12" pipe is quite a bit more expensive.bigger is definitly better, but sails will fit in 10, so with the price difference, i'd go with 10"
- How did you build end caps for corrugated tubing? I think I can get a factory cap for front end but I need something that opens and closes on the back. Any design suggestions?i'm not sure about building end caps with the corrugated tube you'll have, but you will definitly want to be able to access both ends, make sure you can open and close your end caps.
- What's the best way to attach it to the trailer?since it's corrugated, you could just use a metal strap, like this:
i used that with my tube, and mine is just smooth fiberglass.
- Does it need drain holes and/or ventilation?I'd give it drain holes if the end caps are tight, so no water sits in it. If the caps are loose, they might be good enough on their own.
- What's the best way to cut this ADS stuff?maybe a sawzall or jigsaw?