Wndrfl wrote:
Thanks. I'll be doing a bunch of rigging in the next few months. Looking to do about $95,000 of YakAttack upgrades and there is a GPS/fishfinder in my very near future for the AWFC.
I saw that there were screw holes for the trolley but not the guides. The Hobie video showed the screw holes for the blocks but not the guideline retainers. The official Hobie vid shows well nuts being used for the guide line retainer.
Unless I'm mistaken, I thought my 2013 had the recessed threads for the side anchor trolley guides. I would not use the well nuts as those make bigger holes. Just use some stainless steel screws and drill the holes so the screw threads are wider. Add some marine goop or RTV silicone and you're good to go. That will be plenty sufficient to hold those small black knobs that are used as guides.
$95K in accessories!!! That's a lot!!