Return to Hobie.com
Hobie Forums
It is currently Thu Mar 28, 2024 8:21 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Sun Nov 24, 2013 7:27 pm 
Offline
Site Rank - Deck Hand

Joined: Sun Nov 10, 2013 10:56 am
Posts: 16
Location: So. Calif.
Picked up a used Pro Angler 12 recently and starting the mods.
I think I know, but double checking the purpose of these two screws that are installed on the inside of the hull next to the front legs of the Vantage seat.
They seem to be holding the blocks of foam that are installed in the sides from slipping down.
I see the rudder and seat tilt lines and they are mounted to the floor and the steering is in back of this area, so I don't believe that there are any pulley blocks in this area
The screws in question have the red arrows
Thanks!

Image

Image


Top
 Profile  
 
PostPosted: Mon Nov 25, 2013 9:59 am 
Offline
Site Rank - Deck Hand

Joined: Tue Nov 19, 2013 2:30 am
Posts: 17
good ?... I was wondering the same thing yesterday.


Top
 Profile  
 
PostPosted: Mon Nov 25, 2013 10:19 am 
Offline
Site Rank - Admiral

Joined: Thu Dec 06, 2012 11:47 am
Posts: 178
Location: Florida's Treasure Coast.
They hold the structural foam in place that is in the gunnels (side).
I had to back these out (screws), so I could move the foam when I mounted the YakAttack GT90 GearTracs on top of the gunnels, between the side boards & the side carry handles.

_________________
Image
~YakAttack Pro Staff ~ LIVE Watersports Pro Staff ~ RAM Pro Staff ~ Power-Pole Micro Pro Staff ~ Columbia Pro Team~


Top
 Profile  
 
PostPosted: Mon Nov 25, 2013 11:24 pm 
Offline
Site Rank - Deck Hand

Joined: Sun Nov 10, 2013 10:56 am
Posts: 16
Location: So. Calif.
Lt.FireDog wrote:
They hold the structural foam in place that is in the gunnels (side).
I had to back these out (screws), so I could move the foam when I mounted the YakAttack GT90 GearTracs on top of the gunnels, between the side boards & the side carry handles.

Thank you so much!
I might be needing to access this area in the near future


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group