|
Site Rank - Admiral |
Joined: Wed Aug 08, 2007 10:20 pm Posts: 295 Location: South Boardman, Mi
|
I would try a plastic polish. Available at stores like Walmart. If you are doing a large area you should invest in a power buffer.
Alternatively you could try sand paper. I would suggest starting around 500 or 800 grit and finishing with 1000 grit.
After polishing or sanding put some wax on the hulls. The wax will reduce UV transmission providing some protection from further oxidation, and it will make the hulls easier to wash. I do not believe that the wax will damage ABS plastic, but maybe someone can back me up or call me out on this one.
Good luck
|
|