Return to Hobie.com
Hobie Forums
It is currently Thu Mar 28, 2024 3:13 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Simple Motor Mount on TI
PostPosted: Mon Feb 11, 2013 6:17 pm 
Offline
Site Rank - Old Salt

Joined: Tue Jul 19, 2005 6:29 pm
Posts: 2763
Location: High Point, NC
I went out Sunday and put the Simple Hobie Motor Mount through it's paces on Hobie's largest and heaviest fishing kayak, the Tandem Island.

Although this short video is really meant to show how well the mount works, I was surprised to find that the little 18lb thrust motor I've been using in the videos will push the big Tandem Island just as fast as it'll push the Adventure Island.

http://www.youtube.com/watch?v=viE66Knbt4o


Top
 Profile  
 
PostPosted: Tue Feb 12, 2013 10:43 pm 
Offline
Site Rank - Captain

Joined: Fri May 04, 2012 9:58 am
Posts: 74
Location: Pensacola, FL
Great review Tom! Always learn something reading your threads. I still have your PVC bunk design on my trailer from years ago.

Jay

_________________
Founder - Yangler.com

President - Gulf Coast Kayak Fishing Association

Like us on Facebook!

Check out my PA12 mods HERE


Top
 Profile  
 
PostPosted: Mon Dec 30, 2013 9:43 am 
Offline
Site Rank - Captain

Joined: Mon Oct 14, 2013 8:39 pm
Posts: 30
Location: Mendocino, N. California
Tom,
Very nice and clean.
I've been working on such a mount for my TI.
I had assumed the fitting on the TI would perfectly accommodate a standard PVC pipe (SCH 40 or 80)
The 1 1/4" pipe is pretty sloppy and 1 1/2 too wide.........Dunno .... :?
Wondering; If the 2013 TI is different since 1 1/2'' seems to be the diameter that has been recommended for this mount .
I can tighten the 1 1/4 pipe w/ some pipe tape, but that's kind of funky.
Don
Ranger 29, SF Bay
2013 "Mango"


Top
 Profile  
 
PostPosted: Mon Dec 30, 2013 2:18 pm 
Offline
Site Rank - Old Salt

Joined: Tue Jul 19, 2005 6:29 pm
Posts: 2763
Location: High Point, NC
It doesn't have to fit tight into the rod holder as the spacing between the main upright and the outer section will fit tight against the hull. In other words, it doesn't rely on a tight fit in the rod holder. That's not what secures it. You want the tube in the holder to slide in and out easily.


Top
 Profile  
 
PostPosted: Mon Dec 30, 2013 6:41 pm 
Offline
Site Rank - Captain

Joined: Mon Oct 14, 2013 8:39 pm
Posts: 30
Location: Mendocino, N. California
Tom,
I discovered exactly that today while playing with some PVC.
1 1/4" is the size .......I realize I wouldn't have wanted it any tighter.
Thanks


Top
 Profile  
 
PostPosted: Mon Dec 30, 2013 7:06 pm 
Offline
Site Rank - Old Salt

Joined: Sat Nov 05, 2011 1:58 am
Posts: 2893
Location: Forster, NSW, Australia
Just a random thought I used in another project. If you want a firm fit, but be able to remove a tube from inside another tube later, cut out a vertical slot in a tube (the size of which being about the same diameter as the "target" tube). When you squeeze the slotted tube, its diameter will reduce enough to fit, but the "spring tension" will help to hold it firmly in the target tube.

_________________
Tony Stott
2012 Tandem Island "SIC EM" with Hobie spinnaker


Top
 Profile  
 
PostPosted: Thu Jan 02, 2014 7:36 pm 
Offline
Site Rank - Captain

Joined: Thu Sep 17, 2009 9:09 pm
Posts: 104
Location: Vancouver Island, British Columbia
I wanted to take this opportunity to thank you for this idea, Tom. I have been thinking about some electric motor help on my AI to deal with the currents in Juan de Fuca Strait, which runs between my home on Vancouver Island, and the Olympic Peninsula in Washington State. Your idea for this simple mount inspired me to start getting the necessary pieces together. I've gone with a Minn Kota 30 lb thrust motor rather than your 18 but everything else will be the same. The last couple of things to buy will be the clamps to hold the motor shaft and a battery. Having the motor will increase the number of days i can be on the water fishing for salmon in the AI as I can push the envelope a bit further .
Thanks again!
T2

_________________
Fish worship--is it wrong?


Top
 Profile  
 
PostPosted: Thu Jan 02, 2014 7:55 pm 
Offline
Site Rank - Old Salt

Joined: Tue Jul 19, 2005 6:29 pm
Posts: 2763
Location: High Point, NC
Glad you like it. I talked to a guy today that just finished and tried one on his TI and he seems to like it as well. Simple.


Top
 Profile  
 
PostPosted: Fri Jan 03, 2014 8:54 am 
Offline
Site Rank - Captain

Joined: Sun May 08, 2011 6:36 am
Posts: 59
Location: CT
To All,

I have a 2012 TI - was thinking about using the cup holders and noticed that some PVC sked 40 end caps fit nicely in the holders. My thought was to Goop them into the bottom with a hole drilled thru the side, aligned with the slot in the hull. That way you can attach PVC pipe into cap and lock it w a J bolt, entering thru the slot.....

My 2 cents!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group