2015 TI Mast rotate bearing material and diameter?

Have just returned from a great offshore trip around The Lizard and Lands End. TI was great and I camped onboard under an awning.

Now have noticed that the mast bearings are still there, but most are in the mast well....

Suspect I will have to replace the bearings and the top and bottom keeper plates. I would like to carry a spare set of bearings.

Looks like they are Delryn, and the size is either 10mm, or, 3/8". Can anyone please confirm this?

Many Thanks

90610111 DELRIN BALL 3/8 DIA - FURLERS

24 required

90610112 DELRIN BALL 3/8 DIA (PKG OF 12)

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)

While you have it apart to replace the bearings, it might be opportune to sand the mating plate faces with a rigid surface to eliminate any high-spots, thus reducing the possibility for future escape of delrin bslls

_________________
Tony Stott
2012 Tandem Island "SIC EM" with Hobie spinnaker

Many thanks to you both!