Return to Hobie.com
Hobie Forums
It is currently Mon Dec 09, 2019 2:03 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Mon Oct 07, 2019 9:14 pm 
Offline
Site Rank - Deck Hand

Joined: Mon Oct 07, 2019 8:26 pm
Posts: 3
Hello, took my mirage sport out this past weekend and noticed a decent amount of water in the hull. I haven't ran Amy pressure tests to check if there is a hole in the hull but I did give it a quick visual check with a flashlight in the hull. I couldn't find any hulls but noticed that the plastic gaskets where the rudder lines run through are cracked/broken. I was wondering if water would be able to enter through thoses gaskets. If so, where can I get replacements and/or what are alternatives to getting those holes fixed?Image

https://photos.app.goo.gl/eyqmvfh6N3gSUXhV6


Top
 Profile  
 
PostPosted: Tue Oct 08, 2019 1:07 pm 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 13113
Location: Oceanside, California
There is an o-ring that is inside the tube that should seal it. You can replace the line in the tube as an assembly:

80025001 LINE CONTROL ASSY - (1) LINE
Image

_________________
Matt Miller
Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA


Top
 Profile  
 
PostPosted: Tue Oct 15, 2019 1:32 pm 
Offline
Site Rank - Deck Hand

Joined: Mon Oct 07, 2019 8:26 pm
Posts: 3
mmiller wrote:
There is an o-ring that is inside the tube that should seal it. You can replace the line in the tube as an assembly:

80025001 LINE CONTROL ASSY - (1) LINE
Image



So I ended up running the water test(I filled the hull with soapy water and lifted one end and then the other, looking for spots where water was leaking. Luckily, the hull seems to be ok, no holes. My suspicion was correct, the water is going in through the rudder up/down line entry holes. Water was also moving through where the Up/Down knobs/pull levers live, I don't know if that is normal. Looks like I'll need the above replacement?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group