Where to buy the H14 Turbo dolphin striker WIRE ??

Hi... one of the forks on my dolphin striker wire rusted through and broke... this is the 3d season for it, which really surprised me... I put ALL new rigging and it all still looks great, except for this item...

Anyway... where do I buy JUST the wire? It's already a turbo so I don't need the kit?

Didn't see at Murray's . com and ... the part number shows as a rod in the manual, but mine is a wire.

Help! Turbo turbo.... LUV how this little boat just hauls butt...!!

Thanks much!
-Rob

H14T
H18SX

I made one for my 14T with a hand swagging tool
You can call Murrays Marine and they will make one for you if you do not have tool

I think the wire ones were an aftermarket kit, but I think Murrays would be a good bet!

On the striker post, is there a difference between the 16 and a 14 striker? ThANKS.

For the "wire" striker there have been a few variations. Murrays had sold a different one than Hobie's I believe. That one had a "captured" wire that had to be made on the casting. Hobie's is slotted allowing wire replacement. We do offer a replacement wire with end fittings # 11170000 (its in the catalog numerical section).

The production H14 Turbo strikers were stainless rod like the H16 but shorter.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)

Try west marine

I have just the wire if you haven't found or made one yet. Hit me off line at danberger at mindspring dot com

Dan.

hey
ive got a really old h14 (some one said maybe 1973)and i thought it had been converted to a turbo because it has all the stuff but its dolphin striker is the stainless steel model that only come with the production made turboswhich started to be made 1980's ish im confused

by the way the number on the rear right pylon is 2347

It may not be the original front crossbar, or

It may be a retrofit (it's not that hard - I did one on my 14).