Where to Buy?

Phil Edwards Glider

The glide is collaboration between Phil Edwards, Colin McPhillips and Mark Johnson. The shape is based on a solid mahogany board that Phil shaped decades ago. We took Phil’s master shape and tweaked the rocker and outline a bit to come up with an instant classic. The board has perfect foil and a beautiful outline smooth contour on the bottom make this board a glide master. The bottom starts out in the nose with roll from rail to rail then flows into a slightly rolled bottom with 60/40 rails. In the tail the board has slight vee with soft down rails to a hard edge at the end of the tail.

Phil Edwards Glider
  • Specifications (Range)
  • Length: 10' - 11'
  • Width: 23 1/2" - 24 1/2”
  • Thickness: 2 7/8" - 3 1/4"
  • Nose: 15" - 16”
  • Tail: 14" - 15”

  • Options
  • Stringer(s): Triple redwood stringer wood tail block
  • Glass: 8 oz volan top and bottom with volan deck patch and tail patch
  • Fins: Phil Edwards designed fin either glass or fin box with fiberglass fin
  • Color: Clear or tint

  • Performance
  • Surfing Type: 0
  • Wave Height: Knee high to over head
  • Wave Type: Point break or reef break

Available Phil Edwards Glider Boards

  Serial # Description  
317043 NEW HOBIE PHIL EDWARDS GLIDER:Triple redwood stringers- volan deck & tail patches-wood tail block-resin leas loop-Phil Edwards Fiberglass fin. View Board »
317078 Triple red wood stringer full volan w/ volan deck/tail patches resin loop wood tail block View Board »
317085 NEW HOBIE PHIL EDWARDS GLIDER:Triple redwood stringers- volan deck & tail patches-Tint: B&R red w/ blk. pin-wood tail block-drill box-Phil Edwards Fiberglass box fin View Board »