Bolt for Cam Lock Knob on 2002 Outback

I've been able to find the Cam Lock Knob online, but none of them indicate exactly what size bolt I would need. Does anyone know what size I would need or possibly a part #?

We don't stock some of the older bolts... May have to remove the other and match at Home Depot or something.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)

Do you have any info on the length/size/thread for the original bolt? I don't have either of the cam lock knobs, so both would need to be purchased. I'm fine with getting one at a hardware store, but would be helpful if I had the exact specs.

They varied and changed over time... I don't have a reliable spec.

Both of these are listed in an old catalog. You should be able to tell how deep the hole was penetrated to the the correct length for that year model.

BOLT 3/8-16 X 1-1/2 HEX CAP-S

BOLT 3/8-16 X 2-1/2 SCK H

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)