how to find crack in Revolution hull?

The last two times we've been out one of our Revolutions has taken on water and we suspect a crack in the hull. However, if there is one we can't see it. We've inspected around the drive port and, finding nothing, have examined the rest of the bottom. There are a bunch of scratches from oyster beds which probably makes ID difficult. Any suggestions would be appreciated.

Also, from what I'm seeing a good repair would be hard to pull off. We're way beyond warranty. So are we looking at duct tape?

Leak testing: viewtopic.php?f=21&t=12575

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)

very helpful, thanks.

Before soaping my boat up, I found this apparent crack on the starboard drive cam. If this could be the problem, I'm thinking that I could to seal it by putting a rubber washer under the cam, with an intervening metal washer to allow the cam to turn properly.


hmm. The img tag isn't working, here's the link to the pic https://photos.app.goo.gl/qo29sNo4TMEEzyTm9

That could be it. Search DP8010 in the forums for possible cam column repair idea.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)

Great, thanks! I'll give the DP8010 a try.