H16 France Rudder Assumbly - Delrin Screws

So....I have a 2001 H16 built in France. No surprise, but over the years, I have found a few differences between this boat and previous Hobie 16s I have owned. So...a couple of questions on rudder assembly parts?

Does anyone know if the delrin screws are metric threaded? I saw on a Joy Rider TV video they have a different part number (99220825) and I think I found that they may be a M18 x 2 thread.

And if so...does anyone know how I could grab a spare or two?

Thanks!

Andrej

_________________
2001 H16E (European Boat) Sail #108348 Cabo
Club Wave
1991 H14T (Crushed by a Tornado)
2006 Bravo (sold)
1986 Hobie 16 (sold)
1981 Hobe 16 (sold)
1980 Hobie 14 (sold)

Yes you are correct, metric threaded, I found out the opposite way when I bought some spares for my 16 when I was back in the UK. My boat here in Japan is a US build and no dice with the screws when I got back. You can order the correct ones for your boat from one of the Hobie suppliers in Europe/UK.

_________________
Hobie Wave 2004
Hobie 14 1991 Plum 40525
Hobie 16 1985 Nationals White Prism 91964
Hobie 16 1985 European Championships Palma 114072

Should be the same as the early Tiger cam screw.

In the US as: F99220006 TIGER CAM TENSION SCREW

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)

Thank you, Josef and Matt. Appreciate the responses!! I will check with my local dealer for the Tiger part or else, I did find a dealer in France that I could try to contact.

_________________
2001 H16E (European Boat) Sail #108348 Cabo
Club Wave
1991 H14T (Crushed by a Tornado)
2006 Bravo (sold)
1986 Hobie 16 (sold)
1981 Hobe 16 (sold)
1980 Hobie 14 (sold)