Return to Hobie.com
Hobie Forums
It is currently Thu Sep 11, 2025 2:50 am

Board index » Hobie Catamaran Sailing » Hobie 16

All times are UTC - 8 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 2 posts ] 
  Print view Previous topic | Next topic 
Author Message
Triggs
 Post subject: Batten Cap Rivets
PostPosted: Wed Aug 20, 2008 4:38 pm 
Offline
Site Rank - Admiral

Joined: Mon Aug 07, 2006 1:40 pm
Posts: 212
Location: Ontario, Canada
What size are the rivets for the batten caps on the main? Can standard rivets be used here?

_________________
Division 10, Fleet 185
Hobie 17 and Hobie 14
Top
 Profile  
 
sunvista
 Post subject: Re: Batten Cap Rivets
PostPosted: Thu Aug 21, 2008 5:17 am 
Offline
Site Rank - Old Salt

Joined: Mon Sep 19, 2005 10:18 am
Posts: 778
Location: Virginia Beach VA
Triggs wrote:
What size are the rivets for the batten caps on the main? Can standard rivets be used here?
I replaced some recently. I think I used 5/32 diameter x 1/4 length aluminum. SS rivets tend to pull through the plastic before they pop or break off. I've also used #6 x 1/2" flat head brass screws with nuts. They work well for a quick repair on the beach. You don't need a rivet kit and you don't have to punch or drill out the old rivet. Great for sail plates too.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 2 posts ] 

Board index » Hobie Catamaran Sailing » Hobie 16

All times are UTC - 8 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group