Front Corner Casting Jib Sheave?

Page 1 of 1

[ 3 posts ]

Print view

Previous topic | Next topic

Author

Message

aberrant

Post subject: Front Corner Casting Jib Sheave?

Posted: Mon May 11, 2015 11:23 am

Site Rank - Deck Hand

Joined: Fri Jul 11, 2014 9:54 am
Posts: 12

I have an older 70's 16 and I'm upgrading the front crossbar and the corner castings to eliminate the old jib traveler system and move to the integrated system. I'm looking at the corner castings on Murray's and West Coast Sailing (http://www.westcoastsailing.net/default ... right.html) and in the picture I don't see the integrated sheave? Is this just a bad picture or is there a different part number that includes the jib sheave?

Top

MBounds

Post subject: Re: Front Corner Casting Jib Sheave?

Posted: Mon May 11, 2015 1:53 pm

Hobie Approved Guru

Joined: Mon Jul 14, 2003 7:11 pm
Posts: 5198
Location: Detroit, MI

If they have current stock, then the casting should include the integrated sheave. They've been made that way since the mid '90s, but some retailers may still have old stock (it's not like the things go bad).

You had best ask them before ordering.

Top

mmiller

Post subject: Re: Front Corner Casting Jib Sheave?

Posted: Mon May 11, 2015 3:06 pm

Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15090
Location: Oceanside, California

The sheave and rivet that holds it are separate parts from the castings. Installed after the casting in on the beam.

60620000 SHEAVE 1"
8011251 RIVET 3/16 x 1-1/8 PH-AL

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)

Top

Page 1 of 1

[ 3 posts ]

Board index » Hobie Catamaran Sailing » Hobie 16

All times are UTC - 8 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to: