lots of parts

hi y'all,

i just bought a parts boat to get my 16 back on the water and it came with about 2 or 3 boats worth of parts,
I've got what i need out of the pile and now i have, well a pile.

no hulls but I've got extra rudders, castings, masts, booms, wires, tramp frames, and an extra cat trailer with good texas registration.

im in centreal texas and could stand to get it all out of the barn,

not looking for much money, just trying to clean up and recoup a little of the investment, let me know if y'all need anything

thanks

nathan

Id do both rear corner frame castings if price is right shipped to 97739. I seem to have a knack for cracking them

_________________
1980 H16

Got any 6:1 mainsheet blocks?

_________________
Steve
2017 Hobie 16 "Cayman" sails 114795
1985 & 1973? Hobie 14 "Sea & Ski"

If you have any swivel cam cleats with the curved base for mounting on the beam there may be some people looking for them from the H18 spinnaker thread for use as a spin halyard cleat. I just got a used one off ebay myself.

Steve,

I know I have a couple extra main sheet systems but I'll have to check and see what the blocks look like. I have not gone though everything just yet . I'm pretty sure I've got a 6:1. I'll be back at the ranch next weekend and I'll take a peek. I'll let you know.

Thanks

Nathan

I would be interested in a main sheet traveler. Pre-1994 version. Busted lower portion in a gybe last fall. I wont forget a traveler stop knot again.

_________________
Glenn Davies
'81 H-16 Cat Fever/Blue Hulls
'83 H-14 Cat Fever/Blue Hulls

Good to know, Glenn! I am not sure if I have a stop knot, but will check next time out.

Original Poster: Please let me know on the blocks! I have the 5:1 Seaways still and would love to go to the 6:1 Harken's.

Thanks all,

Steve

_________________
Steve
2017 Hobie 16 "Cayman" sails 114795
1985 & 1973? Hobie 14 "Sea & Ski"

Hi Nathan,

I would be interested in two jib sheet blocks with the car - for a 1982 H 16. Happen to have these? Sincerely, [email protected]

I am in need of both lower rudder castings, the mast base, and the mast step. Also Trap wires if you have them.

I'm in the process of restoring a '80 H16.

Thank you.

Chris

Hi Nathan, I just snapped one of the rudders on my 74' hobie 16. Would really appreciate it if you could ship me one to 55021 if you still have one lying around.

thanks, Mike

Nathan
I'm new to the forum and I'm looking for the lower block and cleat for the main sheet on a hobie 16. Standard hobie part would work best for me.

Victor Toce
[email protected]

Hi Nathan, If you still have a rudder available I would love to buy one from you. Shoot me an email if you like at [email protected] Thanks, Mike

Sorry to bring back an old thread, but you wouldn't happen to still have any of those bits and pieces laying around would you?

_________________
'79 H16 "Carmelita"