Twist and Stow Down cable repair

Darn mice chewed the cable that is used to drop the ruder on my 2018 Outback. Any video out there that shows how to replace it. What I need is how to determine how long the nylon cord needs to be and how the spacing of the bungie cord.

Hobie used 2mm Spectra cord which is a little more difficult to source. You can probably find 2mm Dyneema much easier (Amazon). The two are basically identical, with a small change in the manufactures process. YouTube search for “Replacing Hobie Rudder Control Lines”. There are several videos on the topic. Use a phone to take pictures inside the boat (if you can’t get your head inside to see. It’s not a difficult process, easily done with basic skills. Good luck

I do not need the Dynama. I need the Nylon cord that runs from the cockpit back to the dynamo. I am trying to figure out what length I need and how to space the bungee shock.

Update: Cord is 3/16 no stretch Nylon 106” long. bungee is 20” long. Bungee to stretched to 30” when attached to the nylon cord.