Lowrance Ready transducer fitting hardware (2016 Outback)

Hello all...first post here.

I recently acquired a 2016 Outback. I am in process of piecing together the required parts to install a Hook2 5 Splitshot. Unfortunately, the kayak did not come with the original owners manual OR transducer install kit. I was able to order the grommets for the wiring, however, I am having trouble sourcing the parts needed to mount the transducer onto the Lowrance Ready plate. Is anyone aware of part # I can order?

I think this is what I need but I don't want to order from Australia. :S

https://hws.com.au/product/lowrance-rea ... -hardware/



Any help would be appreciated!

John

I found the parts (not in a kit, but separate) here https://americankayaksupply.com/hobie-l ... SnEALw_wcB

and here https://americankayaksupply.com/hobie-lowrance-adapter/

You need:

86506001 - 2 x Lowrance Adaptor brackets
86506201 - 2 x Transducer support clips
8050211 - 1 x Nylock nut
86509501 - 1 x Screw

Those are the individual parts as shown in that photo, and yep, that should be all you need to fit the tranny

_________________
Kayak Fishing Specialist: SLH
https://slhobie.com.au