Return to Hobie.com
Hobie Forums
It is currently Thu Jun 19, 2025 2:25 am

Board index » Hobie Kayaking / Fishing » Hobie Mirage Lynx

All times are UTC - 8 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Print view Previous topic | Next topic 
Author Message
Tombo
 Post subject: Lynx modifications
PostPosted: Fri Feb 25, 2022 2:11 pm 
Offline
Site Rank - Deck Hand

Joined: Fri Jan 13, 2012 9:35 am
Posts: 16
My modifications to Hobie Lynx. I installed the Lynx H rails, H rails from a newer Outback, using only one rail across the bow. Length was cut down so as to screw into two of the four preset holes. I did this to mount a rod holder and stow my paddle under it. I used two tie wraps as loops to make it easier to secure/remove the rear seat to the kayak. Attached a loop using stretch cord to secure my rudder to the rudder cables, I got tired of removing the rudder after every trip, this way the wind will not blow it around. Lastly I purchased a seat riser kit from a cool guy in Navarre Beach, raised the front one inch, the the rear one and half inches. I am selling the 180 drive that came with it, never used as I use the Hobie with kick up fins.

Tell us your modifications.
Top
 Profile  
 
Tombo
 Post subject: Re: Lynx modifications
PostPosted: Mon Feb 28, 2022 2:01 pm 
Offline
Site Rank - Deck Hand

Joined: Fri Jan 13, 2012 9:35 am
Posts: 16
Kind of quiet in here.
Top
 Profile  
 
rockcrawler
 Post subject: Re: Lynx modifications
PostPosted: Thu Mar 10, 2022 1:06 pm 
Offline
Site Rank - Captain

Joined: Thu Aug 20, 2009 3:15 pm
Posts: 66
Location: Folsom, CA
Why is it you don't like the 180 drive?
Is it just that you already had a non-reversable drive and were fine without the reversing feature?
Top
 Profile  
 
Mahi
 Post subject: Re: Lynx modifications
PostPosted: Fri Mar 11, 2022 1:54 am 
Offline
Site Rank - Captain

Joined: Tue Feb 01, 2022 12:28 am
Posts: 68
Location: New Zealand
Pics or it didn't happen :)

_________________
2014 Hobie Outback set up for rod and longline fishing
Top
 Profile  
 
Tombo
 Post subject: Re: Lynx modifications
PostPosted: Fri Mar 11, 2022 5:57 am 
Offline
Site Rank - Deck Hand

Joined: Fri Jan 13, 2012 9:35 am
Posts: 16
I will try to take pictures before the cold front comes in.
Top
 Profile  
 
Tombo
 Post subject: Re: Lynx modifications
PostPosted: Tue Mar 15, 2022 4:28 am 
Offline
Site Rank - Deck Hand

Joined: Fri Jan 13, 2012 9:35 am
Posts: 16
I have the pictures, but how do I Post them?


Last edited by Tombo on Sat Mar 19, 2022 3:35 am, edited 1 time in total.

Top
 Profile  
 
Mahi
 Post subject: Re: Lynx modifications
PostPosted: Tue Mar 15, 2022 4:44 am 
Offline
Site Rank - Captain

Joined: Tue Feb 01, 2022 12:28 am
Posts: 68
Location: New Zealand
Probably easiest way to do it is to open a free account at this site https://postimg.cc . Your pictures can be uploaded to this site. You then click on the pic and click share, then click on Hotlink For Forums and paste that into the post here.

_________________
2014 Hobie Outback set up for rod and longline fishing
Top
 Profile  
 
Second Skin
 Post subject: Re: Lynx modifications
PostPosted: Fri Mar 18, 2022 4:15 pm 
Offline
Site Rank - Captain

Joined: Tue Jul 16, 2019 5:00 am
Posts: 30
this forum is stuck in the dark ages. pictures aren't going to happen
Top
 Profile  
 
schatten
 Post subject: Re: Lynx modifications
PostPosted: Fri Mar 18, 2022 7:56 pm 
Offline
Site Rank - Deck Hand

Joined: Mon Mar 14, 2022 9:08 am
Posts: 5
Easy and handy mods and hacks video
https://youtu.be/OYnURHEJBCg
Top
 Profile  
 
Mahi
 Post subject: Re: Lynx modifications
PostPosted: Fri Mar 18, 2022 8:43 pm 
Offline
Site Rank - Captain

Joined: Tue Feb 01, 2022 12:28 am
Posts: 68
Location: New Zealand
Pictures can be done using the method I described. To show that check this, my first ever thread here

https://www.hobie.com/forums/viewtopic.php?f=11&t=69475

_________________
2014 Hobie Outback set up for rod and longline fishing
Top
 Profile  
 
Tombo
 Post subject: Re: Lynx modifications
PostPosted: Sat Mar 19, 2022 3:41 am 
Offline
Site Rank - Deck Hand

Joined: Fri Jan 13, 2012 9:35 am
Posts: 16
rockcrawler wrote:
Why is it you don't like the 180 drive?
Is it just that you already had a non-reversable drive and were fine without the reversing feature?


Already have a drive with kick up fins. No need for 180 drive so I sold it unused to someone else that needs it.
Top
 Profile  
 
Tombo
 Post subject: Re: Lynx modifications
PostPosted: Sat Mar 19, 2022 5:39 am 
Offline
Site Rank - Deck Hand

Joined: Fri Jan 13, 2012 9:35 am
Posts: 16
Why is this site so difficult to post pictures? I belong to other forums and all of them are easy.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Board index » Hobie Kayaking / Fishing » Hobie Mirage Lynx

All times are UTC - 8 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group