Return to Hobie.com
Hobie Forums
It is currently Thu Mar 05, 2026 1:04 am

Board index » Hobie Catamaran Sailing » Hobie 14/14 Turbo

All times are UTC - 8 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Print view Previous topic | Next topic 
Author Message
Trimaran Driver
PostPosted: Fri Jul 12, 2024 7:43 am 
Offline
Site Rank - Deck Hand

Joined: Fri Jul 12, 2024 7:19 am
Posts: 7
Location: Dallas, TX
This is for Matt Miller: In another post some time ago, you shared the print showing cross section and assembly dimensions for the H16 mast.
Is such a print available for the H14/14T mast? If so, could you email me the link?
TIA
David Jones
Top
 Profile  
 
mmiller
PostPosted: Fri Jul 12, 2024 9:49 am 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15097
Location: Oceanside, California
Emailed.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)
Top
 Profile  
 
hobiemark
PostPosted: Sat Jul 13, 2024 4:04 am 
Offline
Site Rank - Captain

Joined: Sat Feb 14, 2015 1:23 pm
Posts: 37
I would like a copy of that as well. Thanks
Mark
Top
 Profile  
 
mmiller
PostPosted: Mon Jul 15, 2024 10:54 am 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15097
Location: Oceanside, California
emailed

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)
Top
 Profile  
 
Gunthen
PostPosted: Mon Jun 09, 2025 2:02 am 
Offline
Site Rank - Deck Hand

Joined: Mon Jun 09, 2025 1:39 am
Posts: 1
@ Matt Miller, any chance you can please send me this drawing as well.
I am re-rigging some training dinghies using broken Hobie 14 and 16 spars and need to manufacture some custom mast steps and hounds.
Any chance you have a .dwg drawing file of the Hobie 14 and 16 spars?

Many thanks.
Top
 Profile  
 
mmiller
PostPosted: Mon Jun 09, 2025 1:10 pm 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15097
Location: Oceanside, California
Emailed

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)
Top
 Profile  
 
JordiBoronat
PostPosted: Tue Jul 01, 2025 2:42 am 
Offline
Site Rank - Deck Hand

Joined: Tue Jul 01, 2025 2:37 am
Posts: 2
@matt miller, any chance you can share the drawing with me too?

I would like to do a mast bracket for the tacktick and would appreciate having the cross section for fitment.

Thanks,

Jordi
Top
 Profile  
 
JordiBoronat
PostPosted: Tue Jul 01, 2025 3:00 am 
Offline
Site Rank - Deck Hand

Joined: Tue Jul 01, 2025 2:37 am
Posts: 2
Matt, any chance you can also share the drawing we me please?

Planning on making a bracket for the tacktick and would be very handy to have it!

Thanks

Jordi
Top
 Profile  
 
thiago.mariani
PostPosted: Mon Nov 10, 2025 6:39 am 
Offline
Site Rank - Deck Hand

Joined: Mon Nov 10, 2025 6:32 am
Posts: 1
@Matt, any chance you can also share the drawing we me please?
Top
 Profile  
 
mmiller
PostPosted: Mon Nov 10, 2025 10:48 am 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15097
Location: Oceanside, California
Done!

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)
Top
 Profile  
 
DAG250
PostPosted: Sun Jan 04, 2026 12:23 pm 
Offline
Site Rank - Deck Hand

Joined: Thu Oct 15, 2020 9:42 am
Posts: 18
Location: Boston, MA
Matt -
I would also like the technical drawings for both the Hobie 16 mast base and step. I'm going to try and fabricate a heavier-duty step and base that rotates and can be left at a mooring. My moored area has some wave action and, given enough time, probably enough to tear the original apart. If it works, I'll open-source the new base drawings to the community and to Hobie.

Cheers.

David
Top
 Profile  
 
mmiller
PostPosted: Mon Jan 12, 2026 3:50 pm 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15097
Location: Oceanside, California
I am no longer authorized to share technical drawings as they are now property of the White River Marine Group (Bass Pro).

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Board index » Hobie Catamaran Sailing » Hobie 14/14 Turbo

All times are UTC - 8 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group