Anything Magic about Git-Rot?

I have a soft spot to fix and I certainly appreciate all the info here about what to do and how but... I'm wondering about Git-Rot brand versus other epoxy mixes.

I can certainly do better from a price point on a thin 2-part epoxy with 30+ minute working time- so, is there anything really superior about Git-Rot (brand)?

Also, and related, is there a general way to calculate based on the area of the soft spot on top of the hull how much epoxy I need- since it has a finite shelf life?
I imagine it would be related to the density of holes drilled into the top hull layer- 1 hole/sq.in., per 4 sq.in, etc. and what drilling pattern is adequate for an acceptable repair?

Thanks for your input!

_________________
Raise your sail one foot, and you get ten feet of wind.
起你的一只帆，和你10英尺的。 -- Chinese Proverb
William D. Latinette @ Latrobe, PA, USA w. H14 Turbo X 2... [email protected]

Penetration, viscosity, hardness when cured (not too hard), bonding strength, easy application... All good with Git-Rot

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)

nothing magic about git-rot...it just works

buy a kit of it and your use questions are answered in the instructions

_________________
Sheet In...Max Out
www.fleet297.org
sailflatlands at gmail dot com