Mast Fork Fix?

So it looks like the mast head fork has completely come off my 2014 Getaway during a capsize.
Any ideas how to fix this?

Adding some detail, I've got the parts from the Getaway (see pic attached) parts catalog but it seems to imply that I need the sheave, spacer, screw and nut to replace whole hook assembly. I presume the spacer/nut need to go on the inside of the mast...? If so, any ideas how? The mast head assembly is riveted.


Sent from my iPhone using Tapatalk

The hook is not shown as it is rarely replaced.

It is the same as a Hobie 16. Requires rivets. May require larger rivets not they have pulled out or a backing plate inside the mast. Holes are 3/16", so if still OK. You can install with:

10680000 HOOK, HALYARD (12 GA)



8011231 RIVET POP 3/16x1/2 PH

and caps (15/64") 8011291 RIVET CAP

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)

mmiller, thanks a lot. Much appreciated.


Sent from my iPhone using Tapatalk