Moldy/Mildewy Trampoline

I've had a tarp over my Wave this winter but when I removed it I noticed a lot of mildew/mold on the tramp . What can I safely use to remove the mold/mildew? Would bleach ruin the Tramp?

It is a new Hobie tramp not secondary market tramp.

Thanks,

Joe

Bleach will even eat stainless steel given enough time.

Try Lysol All Purpose or Clorox Clean-Up with a stiff brush. Both work good. We use the Lysol here at the shop. Just don't leave them on the tramp for hours and hours.

Brian C

I think you could start with a soft scrub with bleach without problem. We commonly use scrubbing powder (ajax) with bleach.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)

I know this thread is a bit old but thought I'd throw another idea out there: pressure washer.

I've used a 2460psi washer with the nozzle set to fan the water out over a broad area so as to greatly reduce the force of the water. There's plenty of force to blast off the mildew/grime/cobwebs/algae but not nearly enough to damage anything. It was gentle enough that I could blast my own foot with no pain.

It took about 2 minutes and the tramp looked showroom new when I was done.