PA 14

can anyone pass on some info on the pa14
i have a 2014 and did the 'h' rail update and everything went well,but my mate has the early version pa14 [does have the vantage seat] but when we put the new shafts in place we notice that they hit an internal bracket.
we also noticed that the old steering shafts were bent
can i just lenghten the shafts or is having 'h ' rails not an option for him
thanks

Taking a look at the serial number on the boat will help us determine what needs to be done to make this work. There's a number of PA's that fall into a certain "pre-steering-update category" that are less compatible with the H-Rail upgrade kit. However, with some modifications the kit can work. You can always go with a 9" or 21" straight H-Rail section for mounting h-rial accessories to.

_________________
Howie Strech
Parts & Accessories Product Manager
Hobie Cat USA

I have a 2013 PA 14 that I installed the H-Rail on and had no problems. Not sure if it is the same metal bracket but I have one that the steering rod goes thru. Looking at doing the same H Rail upgrade to my wife's 2013 PA 12

the other thing we notice was that the shaft lengths are exactly the same
ill chat to him for the number and report back
thanks

HStrech, the number is US-HCCEGG13H213, i hope this works[ but hes as blind as a bat so the g g could be 6 6 ]
thanks for any help