Return to Hobie.com
Hobie Forums
It is currently Sun Sep 07, 2025 10:45 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Tue Jun 15, 2010 7:16 pm 
Offline
Site Rank - Old Salt

Joined: Wed Jul 21, 2004 7:46 pm
Posts: 1457
Location: Santa Cruz
Even with a 60hp outboard strapped to a 300 # boat, I still couldn't right this sucker. I missed the exciting part due to some traffic that I had to dodge.

[youtube]http://www.youtube.com/watch?v=U2OtfZLsK6U[/youtube]

_________________
Sail Revolution
Join us on our new FB Page!


Top
 Profile  
 
PostPosted: Tue Jun 15, 2010 7:41 pm 
Offline
Site Rank - Old Salt

Joined: Sat May 10, 2008 8:15 pm
Posts: 436
Location: Washington DC/Chesapeake Bay
Nice clip Jeremy, what's that soundtrack??? Grooooooveeee......

_________________
'81 H16

If it ain't a blowin', I ain't a goin'


Top
 Profile  
 
PostPosted: Wed Jun 16, 2010 6:07 am 
Offline
Site Rank - Old Salt

Joined: Wed Oct 14, 2009 11:26 am
Posts: 318
Are you using a GoPro?


Top
 Profile  
 
PostPosted: Wed Jun 16, 2010 9:05 am 
Offline
Site Rank - Old Salt

Joined: Wed Jul 21, 2004 7:46 pm
Posts: 1457
Location: Santa Cruz
Yep, GoPro. It's some stock music in imovie. I was calling it 70's cat p*rn music to everyone around, but that was met with disgusted sneers. :D

_________________
Sail Revolution
Join us on our new FB Page!


Top
 Profile  
 
PostPosted: Sun Jul 04, 2010 10:00 pm 
Offline
Site Rank - Old Salt

Joined: Wed Jun 30, 2004 6:39 am
Posts: 470
Location: Finger Lakes, NY
Great/awful video. A reminder to take your mast into the lake or pool and hold it under water and look for bubbles and then seal it if you need to.

I saw a similar situation with a Prindle. After watching the newbies founder for about 30 minutes in high winds and big seas I had a powerboat take me to the wreck. I dove under the tramp, released the halyard and then tied the halyard to a hull. Then we released the shrouds and forestay from the chainplates. The only thing keeping the mast from sinking to the bottom of Seneca Lake was the halyard tied to a hull. We pulled the mast/sail/boom to the surface and laid this mess between the hulls and then towed the whole pile of crap to shore with the help of a powerboat to sort out the mess. Of course it was extremely windy and cold. It took a lot of Jack Daniel's to fight off that chill afterwards.

_________________
The fact that this windy world is largely covered in water obviously means that man was meant to sail.


Top
 Profile  
 
PostPosted: Mon Jul 05, 2010 6:00 pm 
Offline
Site Rank - Admiral

Joined: Tue May 11, 2004 9:59 am
Posts: 278
Location: Mill Creek, WA
I say we rename this video...

"Why we love Surf City Racing" :D :!:

Who was the jumper?

_________________
2003 Tiger - Don Atchley


Top
 Profile  
 
PostPosted: Tue Jul 06, 2010 4:32 am 
Offline
Site Rank - Admiral

Joined: Thu Jan 08, 2009 5:48 pm
Posts: 276
Location: Boston Ma / Newport RI
So how did they ever right this puppy? Mast ditch like the previous poster mentioned?

_________________
Blair T

I love these calm moments before the storm, it reminds me of Beethoven...


'02 Hobie Tiger USA 1152


Top
 Profile  
 
PostPosted: Tue Jul 06, 2010 11:00 am 
Offline
Site Rank - Old Salt

Joined: Sun Mar 16, 2008 10:46 pm
Posts: 470
Of course, the question is (and always seems to be) what works best to seal and how often should you reseal?

Assuming, of course, the minor leaks not the major obvious ones. Like leaks at rivets.

I used some 3M Marine Adhesive Sealant Fast Cure 4000 UV, medium strength around the plugs on a set of Cat Trax with plastic wheels. It came off fast, like a cat spitting out an ugly hairball. I read instructions too.


Top
 Profile  
 
PostPosted: Tue Jul 06, 2010 12:08 pm 
Offline
Site Rank - Old Salt

Joined: Mon Sep 20, 2004 12:36 pm
Posts: 788
Location: Tri-Cities, WA
How long was the boat capsized before the initial righting attempt?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group