Return to Hobie.com
Hobie Forums
It is currently Thu Sep 11, 2025 12:59 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 42 posts ]  Go to page Previous  1, 2, 3
Author Message
 Post subject:
PostPosted: Mon Aug 11, 2008 10:35 pm 
Offline
Site Rank - Deck Hand

Joined: Sun Jul 06, 2008 10:15 pm
Posts: 11
Location: Alexandria, MN
It takes me about 5 minutes, but I just have to pull up the jib and mainsail after carrying them from my garage :D that'll change though once I really start checking out other lakes :(

_________________
86' Hobie 16


Top
 Profile  
 
 Post subject: Rigging Time
PostPosted: Wed Aug 13, 2008 7:20 am 
Offline
Site Rank - Deck Hand

Joined: Mon Feb 25, 2008 9:16 am
Posts: 5
It took me a little longer than usual this spring as i did it all by myself. Biggest issue was that once I stepped the mast, I lost the halyard up the mast - had to drop the mast and re-step! :?

Also, let me put in my vote for Matt's "clean and jerk" stepping routine. Stepping myself using the routine that Matt shows in the video was so easy, I can't figure out why anyone would spring for an special equipment to do the same (i,e. EZStepper). I am 5"10" and about 170 lbs. I workout, but wouldn't day that I'm exceptionally strong. This method was actually easier than I expected it would be.

Brian Day
'81 H-16


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 13, 2008 5:40 pm 
Offline
Site Rank - Old Salt

Joined: Mon Oct 09, 2006 2:34 pm
Posts: 621
Location: NC
FYI, if you loose your halyard, it is much easier, in my opintion to tip the boat on it's side to retrieve, opposed to taking the mast back down.

_________________
James
86' Redline Hobie 16
Sail # 76909


Top
 Profile  
 
 Post subject: Rigging Time
PostPosted: Thu Aug 14, 2008 5:44 am 
Offline
Site Rank - Deck Hand

Joined: Mon Feb 25, 2008 9:16 am
Posts: 5
I'm on a lake with very limited space (i.e. the mast is bigger than the beach!) But I have to admit, I hadn't thought of that. Sometimes the right answer is so simple you don't event think of it!


Top
 Profile  
 
 Post subject: rig time
PostPosted: Thu Aug 14, 2008 8:48 am 
Offline
Site Rank - Deck Hand

Joined: Tue Jul 08, 2008 5:15 am
Posts: 12
Location: Jewett City C.T.
After a few times of doing it my son and i have it down to just about 25 to 30 min thats from stepping the mast to in the water sailing.

_________________
Mark
1989 Hobie 16
Sail # 92778


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 15, 2008 10:29 am 
Offline
Site Rank - Captain

Joined: Sat Jul 26, 2008 12:35 pm
Posts: 128
Location: Houston, USA
Bout 20 minutes is average for me.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 15, 2008 3:23 pm 
Offline
Site Rank - Deck Hand

Joined: Sat May 31, 2008 4:21 pm
Posts: 9
This makes me realize how nice it is to have my hobie on a nice rack, parked on a nice beach...too bad it takes me a hour and 15 to get there!!


Top
 Profile  
 
 Post subject: Re: Rigging Time
PostPosted: Mon Aug 18, 2008 10:40 am 
Offline
Site Rank - Deck Hand

Joined: Sat Aug 16, 2008 11:02 am
Posts: 6
briand19 wrote:
It took me a little longer than usual this spring as i did it all by myself. Biggest issue was that once I stepped the mast, I lost the halyard up the mast - had to drop the mast and re-step! :?

Also, let me put in my vote for Matt's "clean and jerk" stepping routine. Stepping myself using the routine that Matt shows in the video was so easy, I can't figure out why anyone would spring for an special equipment to do the same (i,e. EZStepper). I am 5"10" and about 170 lbs. I workout, but wouldn't day that I'm exceptionally strong. This method was actually easier than I expected it would be.

Brian Day
'81 H-16


Where can I find this video? I'm trying to get a system down where I can rig by myself if possible.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Nov 05, 2008 8:30 pm 
Offline
Site Rank - Captain

Joined: Sun Nov 02, 2008 7:00 pm
Posts: 69
Location: Dewey-Humboldt, AZ
What he is referring to is the factory supplied rigging video that comes with new hobies (on DVD). It is listed in the catalog as VHS but I got a DVD with my Hobie Cat 16. Good thing too because I don't own a VHS anymore. It was great for me. One of the best tricks that Matt showed was to untie the knot on the end of one of the jib sheets and pull it out of it's hole on the cam cleat. Tie a boline in the end of the sheet and put a clevis around the forestay and the loop of the boline. The clevis must be small enough that the forestay cable loop thimble will not pull through. After you step the mast, pull on the jib sheet and cleat it. It will hold it long enough for you to untie the main halyard from the mast and tie it to the bow tang. You can then attach the forestay to the bridles. I did this the first time I rigged my new cat and it worked great. I'm still new at this so it takes me about an hour to rig.

My first cat was a Hobie cat 3.5 from the 70's. (about a 12 footer) It's mast was so small you could step it with one hand. I could rig it up in 15 minutes if I took my time. (no jib)


Top
 Profile  
 
 Post subject: not quite clear
PostPosted: Thu Nov 06, 2008 6:51 am 
Offline
Site Rank - Captain

Joined: Mon Sep 22, 2008 11:01 am
Posts: 86
Location: Southern VT/NH
I have been looking everywhere fot the mast stepping video too. I wish Hobie would post a link to it for older boat owners (or owners of older boats).
You say:
Quote:
Tie a boline in the end of the sheet and put a clevis around the forestay and the loop of the boline. The clevis must be small enough that the forestay cable loop thimble will not pull through.
\I am not clear on what this looks like. Any chance of posting a photo of the set up?
Thanks

_________________
Alfred
'87 H16 Sail 89907
If you aren't sailing on the edge, you're taking up too much room.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Nov 06, 2008 8:16 am 
Offline
Site Rank - Captain

Joined: Sun Nov 02, 2008 7:00 pm
Posts: 69
Location: Dewey-Humboldt, AZ
Unfortunately my camera went throught the x-ray machine at the airport one too many times and my wife lost hers. :roll:

One step I left out is that the two jib clew blocks must already be shackled to the bridle when you start. Then use one of the sheets to hold the forestay as stated above.

The video is in the catalog listed as factory supplied rigging VHS video. As I stated above, my new hobie came with a DVD. I would think if your dealer inquired to Hobie they could get you a DVD.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Dec 28, 2008 7:32 pm 
Offline
Site Rank - Admiral

Joined: Sun Nov 16, 2008 3:09 pm
Posts: 180
Location: Laguna Niguel, CA
it takes me about an hour to get fully ready
ie: mast up, rigged, sails up, in the water, and car parked

recently ive been paying for dry storage at the marina. which means i get to leave my mast up, rudders on, and usually do not have the trailering tie down straps connecting the boat to the trailer. only takes me 20 30 minutes when i can leave my mast up. but its costing me $100/mo. Insane! Though considering i sail twice a week with a $10per launch fee. $100/mo. to keep it in dry storage is a hell of a lot sweeter deal than $80/mo. in launch fees plus having to drive 20miles away to where i would store the boat if it wasnt at the marina.

I guess theres a price to pay for convenience!! :evil:

_________________
1971 H16 (sail #1768)

To all of you on the Hobie Forum... I love you guys!!!
thanks for all the help!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 42 posts ]  Go to page Previous  1, 2, 3

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group