Hi Everybody,
I recently bought a Hobie Cat, Twixxy model.
The problem I am having is that lower rudder castings no longer fits on the pintles.
Please see below:
https://drive.google.com/file/d/11OwuCP ... sp=sharingAt first the castings slipped on to the pintles easily. However I left the boat in the water a few weeks and when I came back, the castings no longer fit.
I tried WD-40 and eventually "tapped" them in with a rubber mallet. However, now one of the casting developed a crack.
The Pintles and castings seem misaligned.
Any advice would be very helpful.
https://drive.google.com/file/d/11OwuCP ... sp=sharing