Return to Hobie.com

Hobie Forums

It is currently Fri Sep 21, 2018 3:27 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Tue Aug 14, 2018 9:16 pm 
Offline
Site Rank - Captain

Joined: Mon Nov 10, 2014 7:10 pm
Posts: 38
The rear right rudder line turning block on my 2017 tandem island is jammed by the rudder up/down line slipping between the block and its mount. It has happened before--and I got back underway by removing the two phillips head screws just in front of the rudder down handle; reaching into the hull and manually moving the jammed rudder line back up onto the pulley. My on-water fix did not last long, as the rudder line has scored the turning block pulley enough so that the rudder line follows this scored line to jam between the block and its housing when I pull on the rudder up/down handles.

Wondering if there is a recommended solution such as a replacement block available? I could not find a diagram on the kayaking parts and accessories catalog.

Image


Top
 Profile  
 
PostPosted: Wed Aug 15, 2018 9:23 am 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 12473
Location: Oceanside, California
This block?

Image
81450001 CHEEK BLOCK - HOBIE $ 11.29

_________________
Matt Miller
Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA


Top
 Profile  
 
PostPosted: Wed Aug 15, 2018 7:09 pm 
Offline
Site Rank - Captain

Joined: Mon Nov 10, 2014 7:10 pm
Posts: 38
Yes, that is the block (held in place with two screws).

Thanks much for tracking this part down. I should be able to order a pair of them, now that you supplied the name/part number.

Sure appreciate the assistance offered by you (and many others) in this forum.


Top
 Profile  
 
PostPosted: Fri Aug 17, 2018 6:09 pm 
Offline
Site Rank - Captain

Joined: Mon Nov 10, 2014 7:10 pm
Posts: 38
itiming wrote:
Yes, that is the block (held in place with two screws).

Thanks much for tracking this part down. I should be able to order a pair of them, now that you supplied the name/part number.

Sure appreciate the assistance offered by you (and many others) in this forum.


Stopped by the nearest Hobie dealer today; but they declined to order based on a minimum order requirement--which I was told would make the order too expensive for this small order of 2 cheek blocks.

Does anyone know where I could make an online order for 2 cheek blocks, based on their Hobie part number?


Top
 Profile  
 
PostPosted: Fri Aug 17, 2018 8:17 pm 
Offline
Site Rank - Old Salt

Joined: Tue Jun 19, 2007 6:14 pm
Posts: 3290
Location: South Florida
Try Austin Kayak https://www.austinkayak.com/

Keith

_________________
2015 AI 2, 2014 Tandem

"Any intelligent fool can make things bigger and more complex ... It takes a touch of genius and a lot of courage to move in the opposite direction." A. Einstein

"Less is more" Anon


Top
 Profile  
 
PostPosted: Sat Aug 18, 2018 7:53 pm 
Offline
Site Rank - Captain

Joined: Mon Nov 10, 2014 7:10 pm
Posts: 38
Chekika wrote:
Try Austin Kayak https://www.austinkayak.com/

Keith


Thanks for the tip. I sent them an email yesterday; but with weekend/busy season, no reply yet.


Top
 Profile  
 
PostPosted: Sat Aug 18, 2018 7:59 pm 
Offline
Site Rank - Old Salt

Joined: Tue Jun 19, 2007 6:14 pm
Posts: 3290
Location: South Florida
I'm not sure they will reply to an email. Give them a call with the part # in hand.

Keith

_________________
2015 AI 2, 2014 Tandem

"Any intelligent fool can make things bigger and more complex ... It takes a touch of genius and a lot of courage to move in the opposite direction." A. Einstein

"Less is more" Anon


Top
 Profile  
 
PostPosted: Tue Aug 21, 2018 9:25 am 
Offline
Site Rank - Captain

Joined: Mon Nov 10, 2014 7:10 pm
Posts: 38
Chekika wrote:
I'm not sure they will reply to an email. Give them a call with the part # in hand.

Keith


Great advice--I was able to get through on the phone to ACK today and they placed the special order. They had received my email, but hadn't acted on it yet.

This issue with the turning block(s) getting scored doesn't appear too common, based on the forum.

FWIW--it happened after we launched out of a ramp in Florida, used by many airboats. The surface was water, but had vegetation on either side of the ramp. I dropped and locked the rudder down about 100 ft off the ramp, as I was unfurling the sail. The rudder was not in clear water, but dragging in water more mud than liquid, which put a lot of force pulling back on the rudder, making it hard to release/raise with the rudder line--which lead to the rudder line slipping off the block and wedge between the block and its housing.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group