Ring King wrote:
I see that Hook1 has three sizes of the Mad Frog Liberator transducer arms. Which one did y'all use on the PA? I'm using a RAM 107 B arm to hold the Humminbird 587ci HD DI head unit and wanted to try the liberator transducer arm but wanted to make sure I got the right one.
Also, did you bolt your RAM mount to the Liberators mounting plate and through the black mounting boards of the PA so that it's essentially all one bracket? That seems to make the most sense to me but without the parts in hand I'm not sure if it'll work that way.
didn't the bung to RAM mount work out for you??
if you're looking to go over the side as an alternative, grab yourself some aluminium bar in 25mm x 3mm from a Lowes or Home Depot, and make one up to your specific needs - costs a heap less than the Mad Frog gear, and you can make it all a specific depth and mounting style...
Grab a bit of bar, mount it flat on your platform of choice, then bend it over the side of your yak, bolt the transducer on the end, or you can get clever, and put a bolt in the middle, so it pivots up so you don't have any concerns about grounding when you come to shore....
I have a Mad Frog arm on my wifes yak, but I reckon the over the aluminium option works better, and will last longer...