paddle holder

How did honor connect the holder to the paddle itself on the PA12? Have BB paddle that is fiberglass and would like to do that for my PA14.

_________________
Steve Valerga Jr.
DV U.S.Army Airborne
1988-92

2012 Pro Angler
Take a kid fishing!

You can use a Scotty paddle clip #136 (that is what is coming as standard equipment on the new PA12) you can then clip your paddle onto the grab handles on the side (PA 14 would work the same as the 12)

Understand, put how did you attached it to the fiberglass paddle?

_________________
Steve Valerga Jr.
DV U.S.Army Airborne
1988-92

2012 Pro Angler
Take a kid fishing!

2 ways - you can screw it onto the paddle and clip it onto the handle - or screw it onto the handle and clip the paddle into it - it works either way. (we are going with the clip attached to the paddle for the PA12 so that you have more freedom of location and it wan rotate around)- if it were mounted directly to the arm you are kind-of locked in to where it will sit.

_________________
Jacques Bernier
http://www.hobie.com/
http://www.facebook.com/HobieCatCompany

Thank you very much, I will drill a pilot hole and use a course/ wood screw. Or did hobie use the rubber set nuts they came with the holder?

_________________
Steve Valerga Jr.
DV U.S.Army Airborne
1988-92

2012 Pro Angler
Take a kid fishing!