Need a quick measurement of comptip halyard if possible.

Wonder if someone would measure the length (on a comptip mast main halyard) from the shackle pin to the shoulder that sits in the V of the halyard hook at the upper end of the rope part of the rope and wire halyard. Need to splice a new one up, lost the old one. Neighboring boats have all aluminum sticks. Thanks

Line Lengths for the Hobie 16
Location Line Size/Type Length Quantity
Aft Tramp Lacing Line 1/4' Halyard 15' 2 ea.
Center Tramp Lacing Line 1/4' Halyard 19' 1 ea.
Downhaul Line (stock downhaul) 3/16' Halyard 5' 1 ea.
Mainsheet Line 3/8' Spun Braid 44' 1 ea.
Jibsheet Line 5/16' Spun Braid 32' 1 ea.
Outhaul Line (stock outhaul) 3/16' Halyard 7'6' 1 ea.
Main Halyard Line - Comptip 1/4' Halyard 51' 1 ea.
Main Halyard Line - Non-Comptip 3/16' Halyard 27' 1 ea.
Jib Halyard Line (old wire halyard)
Jib Halyard Line (Aussie system) 3/16' Halyard
5/32'-1/4' no stretch line 20'
70' 1 ea.
1 ea.
Trapeze Adjustment Line 1/4' Yacht 3'6' 4 ea.
Trapeze Shock Cord 1/4' Shock Cord with 2 Loops 7' 2 ea.
Main Batten Tie Down 1/12' Leach Line 1'5' 1 per batten
Jib Batten Tie Down 3/64' Leach Line (round) 1' 1 per batten
Hawaian System Shock Cord 3/8' Shock Cord with 2 Loops 6'6' 1 ea

This is from Hobie 16 Line Lengths and Wire Guide.

I hope this helps.

Rich

Thanks Rich but I'm looking for length from headboard shackle to shoulder ( of the metal cap) where rope part of halyard converts to wire. Its about a foot give or take,,its the give or take I don't want to guess at. Hope this makes my question clearer. Thanks.

13.5 inches - center of pin to shoulder of stop.

Thank you much! Chris