Hole spacing on TI trailer cradles

Matt, could you post the mounting hole spacing dimensions for the TI cradles?

Thanks, John

_________________
John Robb
2015 TI Azul
Sarnia ON. CAN.

John, I just happen to have one lying around. From the center hole mine measures 19 13/16 to the left and 19 15/16 to the right hole. That is with it sitting flat on a table. The holes are 3/8". I wouldn't pre drill anything to these dimensions, there may be some variation as you can see from the difference on my cradle. I thought 3/8" was a bit large for the mounting bolts and put a plastic tubing bushing in the holes to reduce to 1/4" for my TI cart and also used fender washers to spread the load on the plastic.
- Chris

Only spec I have is spacing between cradles. 67"

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)

Thanks for the info Chris. I've purchased a 2015 Tandem Island and want to outfit a trailer prior to delivery.
John

_________________
John Robb
2015 TI Azul
Sarnia ON. CAN.

Mike, was that 67" from back edge of forward cradle to front edge of rear cradle, or center line to center line?


Sent from my iPad using Tapatalk

On center.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)